7PBHChD wrote:Yes. I tested the route and it works flawlessly.yc3948 wrote:I try tracert command when I use Gargoyle OpenVPN traffic not go
through Gargoyle OpenVPN server at all!!!
And I try you solution, but unfortunately it not working for me, did you test it? Thanks
7PBHChD wrote:No. I mean did you go to the web link I gave and denied access to your clients or any of your router clients have access through the router?
My fault was I deny all access except for certain clients.
So I permitted OpenVPN client address on that page to allow him have access to the Internet.
If you did not restrict access and your OpenVPN client still not go through your router you can change route in /etc/config/ccd/<Nameofyourclientnconfg> from 'push "route 192.168.1.0 255.255.255.0 10.8.0.1" ' to 'push "route 0.0.0.0 0.0.0.0 10.8.0.1" '. After that reconnect your OpenVPN clent and check its IP.
But now, I do not use custom route at all.
The issue was in restrictions that applied to the OpenVPN client in my configuration, as i restrict all Internet and Intranet access by default.
After I allowed traffic for OpenVPN client and set option 'Clients Use VPN For:' to 'All Client Traffic' I can use Internet through my router.
What client are you connecting to OpenVPN?
can you give its routes info?
Version 1.5.9 - Plugins Interface
Moderator: Moderators
Re: Version 1.5.9 - OpenVPN
Many thanks! I find the problem! After I upgrade OpenVPN client software to openvpn-install-2.3.0-I001-i686 it works!!!
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Re: Version 1.5.9 - Plugins Interface
OpenVPN problems fixed. http://www.gargoyle-router.com/gargoyle ... 39622d205d
Last edited by yc3948 on Sat Jan 19, 2013 4:50 am, edited 1 time in total.
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Re: Version 1.5.9 - OpenVPN
OpenVPN problems fixed. http://www.gargoyle-router.com/gargoyle ... 39622d205d
7PBHChD wrote:Yes. I tested the route and it works flawlessly.yc3948 wrote:I try tracert command when I use Gargoyle OpenVPN traffic not go
through Gargoyle OpenVPN server at all!!!
And I try you solution, but unfortunately it not working for me, did you test it? Thanks
7PBHChD wrote:No. I mean did you go to the web link I gave and denied access to your clients or any of your router clients have access through the router?
My fault was I deny all access except for certain clients.
So I permitted OpenVPN client address on that page to allow him have access to the Internet.
If you did not restrict access and your OpenVPN client still not go through your router you can change route in /etc/config/ccd/<Nameofyourclientnconfg> from 'push "route 192.168.1.0 255.255.255.0 10.8.0.1" ' to 'push "route 0.0.0.0 0.0.0.0 10.8.0.1" '. After that reconnect your OpenVPN clent and check its IP.
But now, I do not use custom route at all.
The issue was in restrictions that applied to the OpenVPN client in my configuration, as i restrict all Internet and Intranet access by default.
After I allowed traffic for OpenVPN client and set option 'Clients Use VPN For:' to 'All Client Traffic' I can use Internet through my router.
What client are you connecting to OpenVPN?
can you give its routes info?
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Re: Version 1.5.9 - Plugins Interface
thanks for share, I'm happy with 1.5.9+ http://www.gargoyle-router.com/gargoyle ... 39622d205d updated
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf
Re: Version 1.5.9 - Plugins Interface
Excellent, this is fixing the issue i mentioned earlier in this thread, i can now reboot on the wzr-hp-g300nh v1 and wireless doesn't go to disabled after a reboot. Thank you!
Re: Version 1.5.9 - Plugins Interface
actually scratch that, problem still exists with wzr-hp-g300nh v1, when i reboot the wireless comes back up as disabled.
Re: Version 1.5.9 - Plugins Interface
Have flashed 1.5.9 on the TP-Link wr2543nd without problems. Everything seems to be working correctly. Except 5GHz mode (channel 13 to 165) Never worked with gargoyle on this router. Works well with TP-Link original firmware.
Very good job to all involved with the gargoyle.
http://db.tt/hgKEJOHq
ohh..my english is bad...
Very good job to all involved with the gargoyle.
http://db.tt/hgKEJOHq
ohh..my english is bad...
Re: Version 1.5.9 - Plugins Interface
I'm using Gargoyle 1.5.9 and No-IP.org updating suddenly stop working.
So, I changed this config (on /etc/ddns_providers.conf) based on http://www.noip.com/integrate/request:
to this config:
and works like a charm.
So, I changed this config (on /etc/ddns_providers.conf) based on http://www.noip.com/integrate/request:
Code: Select all
service no-ip.com
url_template https://dynupdate.no-ip.com/ducupdate.php?username=[[USERNAME]]&pass=[[PASSWORD]]&h[]=[[DOMAIN]]&ip=[[IP]]
required_variables domain username password
required_variable_names Domain Name,Username,Password
success_regexp /:01/
Code: Select all
service no-ip.com
url_template https://[[USERNAME]]:[[PASSWORD]]@dynupdate.no-ip.com/nic/update?hostname=[[DOMAIN]]&myip=[[IP]]
required_variables domain username password
required_variable_names Domain Name,Username,Password
success_regexp /^(good|nochg)/
Re: Version 1.5.9 - Plugins Interface
FireVortex: Thanks for bringing this to my attention, and for providing a working fix. I love when bug reports include a solution! I've updated the No-IP code as suggested and it will be included in the next release.