Hello,
About 1 year ago a Hacked mijn Fon 2100 and installed Gargoyle. It worked perfectly until last week I messed up some settings, and I could no longer connect to the device.
I tried reflashing the device, but it did not work.
The only working software I found now is Kamikaze (r14417) Load: 0.00 0.00 0.08
I use Fonflash to install the software.
- gargoyle_1.5.3-atheros-root.squashfs
- gargoyle_1.5.3-atheros-vmlinux.lzma
Loading Gargoyle gives no errors, and the device reboots after flashing.
I cannot get into te GUI of the router. I cannot ping it or what have you.
Flashing back to Kamikazi, and all is well.
I cannot for the life of me remember how I got Gargoyle to work in the first place.
I worked through a number of sites and instructions, but I cannot get it to work.
Is there someone who can point me in the right direction?
OpenWrt Kamakazi to Gargoyle Fon2100 [Solved]
Moderator: Moderators
OpenWrt Kamakazi to Gargoyle Fon2100 [Solved]
Last edited by John-nl on Thu Nov 01, 2012 12:21 pm, edited 1 time in total.
_____________________
John
The Netherlands
John
The Netherlands
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: OpenWrt Kamakazi to Gargoyle Fon2100
The only version I would suggest for a fon2100 would be 1.2.5
See if you can get that loaded either via fon-flash or via redboot
I used to have a fon2100 but the flash chip eventually died
See if you can get that loaded either via fon-flash or via redboot
I used to have a fon2100 but the flash chip eventually died
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: OpenWrt Kamakazi to Gargoyle Fon2100
Thank you !!!
I flashed it with 1.2.5 and the fon is back in action!!!
I am throwing out all other images and keep this one.
I flashed it with 1.2.5 and the fon is back in action!!!
I am throwing out all other images and keep this one.
_____________________
John
The Netherlands
John
The Netherlands
Re: OpenWrt Kamakazi to Gargoyle Fon2100 [Solved]
Great! i found solution for my question about firmware...
Is it possible to enable wifi channels 12 & 13 with 1.2.5 ?
Is it possible to enable wifi channels 12 & 13 with 1.2.5 ?