3G Routers

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
ajcryan
Posts: 3
Joined: Wed Mar 21, 2012 7:12 pm
Location: Australia

3G Routers

Post by ajcryan »

I would very much like to use Gargoyle with my 3G USB connection at home. Are there any routers which are known to support this?

I am looking to buy a router for this purpose, and would like to buy one with the best odds of working!

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: 3G Routers

Post by DoesItMatter »

Possible, but requires some work from you as well.

http://wiki.openwrt.org/doc/recipes/3gdongle

Read up on that page.

You would need to find a router that Gargoyle supports, which is
almost anything that OpenWRT Backfire 10.03.1 supports.

The router needs a USB port and also should have 8MB Flash

You will need to install packages on your own (link above)
and also do some command line configuration as well.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

pbix
Developer
Posts: 1373
Joined: Fri Aug 21, 2009 5:09 pm

Re: 3G Routers

Post by pbix »

Gargoyle support 3G USB dongles natively. You just need to get a supported router with USB port.

For help see.
http://www.gargoyle-router.com/wiki/doku.php?id=3g
Linksys WRT1900ACv2
Netgear WNDR3700v2
TP Link 1043ND v3
TP-Link TL-WDR3600 v1
Buffalo WZR-HP-G300NH2
WRT54G-TM

Post Reply