Hi guys,
sorry for setting up an other post but I wasn't getting any answer in my other post.
How do I set up WPA TKIP?
The only options i have are
WPA2 PSK
WPA PSK
WEP
WPA2 PSK Radius
WPA PSK Radius
When I choose WPA2 it won't let me choose TKIP or AES...and it seems to autodefault to AES... I'm currently using WPA2 PSK and my computers will only connect using WPA2 AES.
The wifi keeps on failing every 2 days or so.
Wireline works but wifi doesn't work.
I've been told people who use TKIP don't have the same problem...please help
How to set up WPA TKIP? Desperate for help
Moderator: Moderators
Re: How to set up WPA TKIP? Desperate for help
What you are seeing is expected. WPA2 by default should always use CCMP AES encryption. WPA by default uses TKIP. Select WPA PSK (also known as WPA-Personal) if you want to use TKIP encryption.
WRT54GL v1.1
Gargoyle 1.4.7
Gargoyle 1.4.7
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: How to set up WPA TKIP? Desperate for help
http://wiki.openwrt.org/doc/uci/wireless
You can configure this via command line
Be aware - any changes you make via command line will only stay
as long as you DO NOT make any more changes to wireless
via the GUI. As soon as you make GUI changes in the wireless section,
those changes you made via command line will no longer be there.
You can configure this via command line
Be aware - any changes you make via command line will only stay
as long as you DO NOT make any more changes to wireless
via the GUI. As soon as you make GUI changes in the wireless section,
those changes you made via command line will no longer be there.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400