Page 1 of 1
TP-Link -1043ND - No access to internet - WAN port not work
Posted: Sun Feb 19, 2012 12:08 pm
by w37
I have TP-Link -1043ND HW ver. 1.8...
Today I upgrade my router from stock firmware (v.3.13.4 110429) to Gargoyle v.1.4.6 and v.1.5.3. After configuring Gargoyle I connect to WAN port my ADSL modem in bridge mode. WAN port not receive signal from ISP, led not flash...
Why?
Help me, please...
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Sun Feb 19, 2012 1:37 pm
by hnl_dk
w37 wrote:I have TP-Link -1043ND HW ver. 1.8...
Today I upgrade my router from stock firmware (v.3.13.4 110429) to Gargoyle v.1.4.6 and v.1.5.3. After configuring Gargoyle I connect to WAN port my ADSL modem in bridge mode. WAN port not receive signal from ISP, led not flash...
Why?
Help me, please...
How do you connect to your ISP?
DHCP, PPoE. static...
if you connect with DHCP, is it possible that the DHCP lease of your old routersetup is blocking your access.
TP-Link is using a wrong MAC address for the WAN port, so after upgrading to Gargoyle/OpenWRT will you get the correct MAC address (that is different from the one of TP-Link).
You can call your ISP at get them to release your DHCP lease.
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Sun Feb 19, 2012 2:41 pm
by w37
I connect to my ISP with PPPoE...
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Sun Feb 19, 2012 3:09 pm
by hnl_dk
w37 wrote:I connect to my ISP with PPPoE...
Okay,
I do not have that much experience with PPPoE.
I guess that you have tried to connect the WAN port to something else or with another cable. Just to make sure that it is the WAN port that has a problem.
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Mon Feb 20, 2012 1:12 am
by w37
It was my first updating of firmware.
I configured Gargoyle through the Web-interface.
As how it is possible to change in a configuration in a command line?
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Tue Feb 21, 2012 1:58 am
by w37
hnl_dk wrote:w37 wrote:I connect to my ISP with PPPoE...
Okay,
I do not have that much experience with PPPoE.
I guess that you have tried to connect the WAN port to something else or with another cable. Just to make sure that it is the WAN port that has a problem.
I have returned on a factory firmware - all works.
Why doesn't work under Gargoyle?
At whom the same problem? How it to solve?
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Tue Feb 21, 2012 3:15 am
by ispyisail
http://www.gargoyle-router.com/wiki/dok ... ridge_mode
If you can't bridge your ADSL router you might need to do double NAT
Also can you show us screen shots of you working config of your original firmware
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Fri Mar 09, 2012 5:29 pm
by pmerrill
I have a similar problem. I got up this morning, no internet access. I'm connected directly to the modem to type this. For some reason, 1.4.7 won't connect to the internet after multiple power up/downs of the modem and the router, it just won't connect.
What the's best way to debug? Are we talking a re-flash here? Is there a known problem? It's been working fine for a week, no problems and then this!
Re: TP-Link -1043ND - No access to internet - WAN port not
Posted: Mon Apr 02, 2012 1:41 am
by Dik0j
I have the same problem, WAN port after flashing doesnt working...
But i have found the solvation for this problem!!!
http://www.gargoyle-router.com/phpbb/vi ... 070#p12070