madwifi on x86 with ar5212 minipci card
Moderator: Moderators
-
- Posts: 8
- Joined: Mon Jul 25, 2011 1:02 pm
madwifi on x86 with ar5212 minipci card
hello
i download gargoyle from git and compiled a firmware for the x86 branch with madwifi driver for my ar5212 card.....
but since gargoyle is using the very old madwifi branch i get a lot of this error
wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)
i download gargoyle from git and compiled a firmware for the x86 branch with madwifi driver for my ar5212 card.....
but since gargoyle is using the very old madwifi branch i get a lot of this error
wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)
-
- Posts: 8
- Joined: Mon Jul 25, 2011 1:02 pm
Re: madwifi on x86 with ar5212 minipci card
anybody is this project dead already.....
Re: madwifi on x86 with ar5212 minipci card
x86 is not in the supported routers list
http://www.gargoyle-router.com/wiki/dok ... ed_routers
I doubt you will get official support but you never know.......
http://www.gargoyle-router.com/wiki/dok ... ed_routers
I doubt you will get official support but you never know.......
Re: madwifi on x86 with ar5212 minipci card
ispyisail: Actually, it is. These are the Alix builds. They're tailored for a specific x86 board which is really small called "Alix" boards, and I tend not to test quite as heavily on this platform (since fewer people own them)... but it is supported.
-
- Posts: 8
- Joined: Mon Jul 25, 2011 1:02 pm
Re: madwifi on x86 with ar5212 minipci card
no i build a firmware for x86 generic not alix and it works fine except for the wireless which keepes on giving this error
wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)
i think it is beacuse like openwrt gargoyle to is using the old madwifi....
i tried recently the ddwrt x86 trial build and i must say it is rock solid stable with theire madwifi version is it because the used the newest madwifi version ?????
ath5k is not good for me askeep getting disconnected when i download heavy with ath5k
41.478700] wlan0: authenticate with 00:02:61:47:35:a3 (try 1)
[ 41.481610] wlan0: authenticated
[ 41.609014] wlan0: associate with 00:02:61:47:35:a3 (try 1)
[ 41.634006] wlan0: RX AssocResp from 00:02:61:47:35:a3 (capab=0x431 status=0 aid=1)
[ 41.634025] wlan0: associated
wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)
i think it is beacuse like openwrt gargoyle to is using the old madwifi....
i tried recently the ddwrt x86 trial build and i must say it is rock solid stable with theire madwifi version is it because the used the newest madwifi version ?????
ath5k is not good for me askeep getting disconnected when i download heavy with ath5k
41.478700] wlan0: authenticate with 00:02:61:47:35:a3 (try 1)
[ 41.481610] wlan0: authenticated
[ 41.609014] wlan0: associate with 00:02:61:47:35:a3 (try 1)
[ 41.634006] wlan0: RX AssocResp from 00:02:61:47:35:a3 (capab=0x431 status=0 aid=1)
[ 41.634025] wlan0: associated
-
- Posts: 8
- Joined: Mon Jul 25, 2011 1:02 pm
Re: madwifi on x86 with ar5212 minipci card
anybody ?????
Re: madwifi on x86 with ar5212 minipci card
Please don't cross-post in multiple forums.
Re: madwifi on x86 with ar5212 minipci card
Gargoyle and OpenWRT backfire includes the newest stable version af madwifi.freakazoid wrote:anybody ?????
that is version 0.9.4, I know this is four years old, but it is the stable version. But there is made changes to madwifi from within openwrt.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
-
- Posts: 8
- Joined: Mon Jul 25, 2011 1:02 pm
Re: madwifi on x86 with ar5212 minipci card
so why do you think i have this error
wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)
is it kernel related then
wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)
is it kernel related then
Re: madwifi on x86 with ar5212 minipci card
Seems to be a problem with OpenWRT 10.03.1freakazoid wrote:so why do you think i have this error
wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xd0 'Hardware d idn't respond as expected' (HAL status 3)
is it kernel related then
https://dev.openwrt.org/ticket/10656
And there has not yet been found a solution.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4