All post regarding X-FTA dongle should to be placed in this forum
The Gargoyle Router Development/Support team does not support X-FTA devices and are unlikely to answer any questions regarding this device.
Thank you for your cooperation
Gargoyle Router Support Team
X-FTA Devices Are Not Supported
Moderator: Moderators
Re: X-FTA Devices Are Not Supported
What is the specific reason gargoyle does not support X-FTA Routers. It appears all other routers are supported. Give me some specific data on X-FTA router.
-
- Posts: 14
- Joined: Thu Oct 18, 2012 1:19 pm
Re: X-FTA Devices Are Not Supported
i also have a X-FTA and need assistance. ![Sad :(](./images/smilies/icon_e_sad.gif)
![Sad :(](./images/smilies/icon_e_sad.gif)
Re: X-FTA Devices Are Not Supported
REBOOT XTFA TO DEFAULTS
I see it is old thread but still actual. I had good working FTA dongle, wired and tried to make WI-FI. I am in trouble since dongle doesn’t respond to LAN, but not DEAD for unbricking.
It is understood how to reboot gongle. I’ve gotten to see the Gorgoyle login page. It came up in under address login block: “with XXXX(network name)”. I wrote and the next came up:
“Settings have been updated. Web page will now refresh.
Changes have been made to the IP address or port number. You will now be disconnected from RT-N66U.
To access the settings of RT-N66U, reconnect to the wireless network and use the updated IP address and port number”.
After reboot main router, well, started again with many ways to reboot dongle and again came to Gorgoyle page. In login address I gave presumable password: “password”.
And it didn’t work again and brought the same message as above.
So who may recommend what the password it should be?
I’d greatly appreciate any comments.
Thanks
I see it is old thread but still actual. I had good working FTA dongle, wired and tried to make WI-FI. I am in trouble since dongle doesn’t respond to LAN, but not DEAD for unbricking.
It is understood how to reboot gongle. I’ve gotten to see the Gorgoyle login page. It came up in under address login block: “with XXXX(network name)”. I wrote and the next came up:
“Settings have been updated. Web page will now refresh.
Changes have been made to the IP address or port number. You will now be disconnected from RT-N66U.
To access the settings of RT-N66U, reconnect to the wireless network and use the updated IP address and port number”.
After reboot main router, well, started again with many ways to reboot dongle and again came to Gorgoyle page. In login address I gave presumable password: “password”.
And it didn’t work again and brought the same message as above.
So who may recommend what the password it should be?
I’d greatly appreciate any comments.
Thanks