root@Gargoyle:/# warning: `smbd' uses 32-bit capabilities (legacy support in use)
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Is this bug report what you are seeing? Looks like ndb is actively trying to fix it. Maybe report your error, router model and your openwrt revision to the bug report... the more people the better. It looks like someone reported the exact same thing 8 days ago, so you should confirm the problem is not fixed (nor forgotten).
Yes the last one seems to have fixed my wireless dropout problem on Tplink WR-1043ND (36 hours with like 6 hours playing games and no cut), thanks very much for these builds )
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00026020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x00006020
ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
Eric bumped openwrt to revision 29342 on Nov. 29th, because it included ath9k bug fixes (TP-Link 1043ND), but you reported yesterday on the openwrt message board problem not fixed with r29323... So you really aren't using the latest driver available are you?
mix wrote:Eric bumped openwrt to revision 29342 on Nov. 29th, because it included ath9k bug fixes (TP-Link 1043ND), but you reported yesterday on the openwrt message board problem not fixed with r29323... So you really aren't using the latest driver available are you?
Installed last evening on my WZR-HP-G300NH. So far it seems to not have the wireless dropouts I was experiencing previously, although I've only "tested" (aka, online gaming for a couple hours) for a couple of hours.
Note, though, that I haven't re-setup my QoS settings and things like that. I will report back once it's fully setup the way I like and has been running for a few days.
Oh and I guess I should note I am not using the new Tor capabilities.