Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

Post Reply
angus
Posts: 20
Joined: Mon Apr 04, 2022 9:24 am

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by angus »

Lantis wrote:
Sat Apr 06, 2024 6:36 am
Fantastic.
Did you change any of the default settings? You must have set your SSID at a minimum I think?
I did set the same SSID to 2.4G and 5G. Besides, fast roaming is enabled. Nothing's more.

angus
Posts: 20
Joined: Mon Apr 04, 2022 9:24 am

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by angus »

I also notice there is a band_steering_threshold does not take effect unless load_balancing_threshold is also set to a value greater than 0. in the usteer page.

whataboutnow
Posts: 47
Joined: Tue Apr 07, 2020 6:29 pm

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by whataboutnow »

VLAN required by ISP

Happy to see this build being released 🤗

can i just check please - my isp requires that I add a vlan ID to my connection details, is that supported in this build?


Many thanks 😊

Lantis
Moderator
Posts: 6840
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by Lantis »

whataboutnow wrote:
Mon May 13, 2024 4:46 am
VLAN required by ISP

Happy to see this build being released 🤗

can i just check please - my isp requires that I add a vlan ID to my connection details, is that supported in this build?


Many thanks 😊
What device do you have?
I finished writing basic WAN side VLAN support last night and need a Guinea pig :)
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

whataboutnow
Posts: 47
Joined: Tue Apr 07, 2020 6:29 pm

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by whataboutnow »

hiya sorry for the delay,
I have a wrt3200acm 😊

Happy to do a couple of hours guinea pig over the weekend.

Lantis
Moderator
Posts: 6840
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by Lantis »

whataboutnow wrote:
Fri May 17, 2024 7:42 am
hiya sorry for the delay,
I have a wrt3200acm 😊

Happy to do a couple of hours guinea pig over the weekend.
I'm compiling a new version for you now. I'll post it in a few hours

EDIT: Available here https://lantisproject.com/gargoyle_cust ... lds/mvebu/
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

marcinkk
Posts: 12
Joined: Sun Mar 05, 2017 5:09 pm

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by marcinkk »

Redmi AX6000 is not supported by Gargoyle 1.15, but it is supported by OpenWrt 23.05.

So I've made the following steps:
- I've cloned gargoyle from github
- I switched to base_on_openwrt_2305 branch
- I've addedd to targets/mediatek/profiles/filogic/config:

Code: Select all

CONFIG_TARGET_DEVICE_mediatek_filogic_DEVICE_xiaomi_redmi-router-ax6000-stock=y
CONFIG_TARGET_DEVICE_PACKAGES_mediatek_filogic_DEVICE_xiaomi_redmi-router-ax6000-stock="gargoyle-large"
- I've addedd to targets/mediatek/profiles/filogic/profile_images:

Code: Select all

xiaomi_redmi-router-ax6000-stock-
Then I've run compilation with:

Code: Select all

make mediatek FULL_BUILD=true
And as a result I have:
gargoyle_1.15.x-mediatek-filogic-xiaomi_redmi-router-ax6000-stock-squashfs-sysupgrade.bin

What is a chance that my AX6000 will run proprely after sysupgrade to this image? It currently has OpenWrt SNAPSHOT installed.

Lantis
Moderator
Posts: 6840
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by Lantis »

High chance. Sysupgrade without preserving settings.
If it works I’d be happy to add the device (as you have)
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

fifonik
Posts: 153
Joined: Fri Dec 02, 2016 3:52 am
Location: Brisbane, AU

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by fifonik »

oliver44 wrote:
Thu Mar 14, 2024 3:45 am
I would like to install some plugins that I also used on wrt1900acs v2 but I don't know what the command is for GL-MT6000, for wrt1900acs v2 I use
Can you compare performance of your MT6000 with wrt1900acs please? Thanks.

angus
Posts: 20
Joined: Mon Apr 04, 2022 9:24 am

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by angus »

Hi Lantis,
Is there a date to release 1.15 final? Thanks.

Post Reply