Gargoyle 1.15.x BETA - 2024-08-11 - Based on OpenWrt 23.05

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

Lantis
Moderator
Posts: 6910
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by Lantis »

If you comment out the 12 changed lines in /etc/tor.firewall that should bring back the old behaviour for you.
https://github.com/ericpaulbishop/gargo ... b31157a6e4
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

angus
Posts: 34
Joined: Mon Apr 04, 2022 9:24 am

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by angus »

Hi Lantis,
Report a WebUI display issue in Connection>Advanced>Internet / WAN. Please create network interface to access upstream modem with an IP and a subnet mask. Save changes and then browse another page e.g. DHCP. After that go back Internet / WAN. You won't see any IP or subnet mask is there. Instead you have to check and uncheck "Create network interface to access upstream modem?:". Both IP and subnet mask show up.
P.S. Running 1.15.x_20240702 build on WRT3200ACM.
Thanks.

Lantis
Moderator
Posts: 6910
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by Lantis »

angus wrote:
Sat Jul 13, 2024 12:02 am
Hi Lantis,
Report a WebUI display issue in Connection>Advanced>Internet / WAN. Please create network interface to access upstream modem with an IP and a subnet mask. Save changes and then browse another page e.g. DHCP. After that go back Internet / WAN. You won't see any IP or subnet mask is there. Instead you have to check and uncheck "Create network interface to access upstream modem?:". Both IP and subnet mask show up.
P.S. Running 1.15.x_20240702 build on WRT3200ACM.
Thanks.
I can’t reproduce this.
Can you check the browser console for errors?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

angus
Posts: 34
Joined: Mon Apr 04, 2022 9:24 am

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by angus »

Lantis wrote:
Sun Jul 14, 2024 1:30 am
I can’t reproduce this.
Can you check the browser console for errors?
No errors were found via browser console...
Should record something for you before looking into this.
Please wait. Thanks.

marcinkk
Posts: 13
Joined: Sun Mar 05, 2017 5:09 pm

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by marcinkk »

marcinkk wrote:
Tue Jul 09, 2024 11:36 am
Lantis wrote:
Mon May 27, 2024 6:08 pm
High chance. Sysupgrade without preserving settings.
If it works I’d be happy to add the device (as you have)
Compiled again today and finally installed:

Code: Select all

Device Name:                                            Gargoyle
Gargoyle Version:      1.15.X (Built 20240709-1351 git@66d5adbf)
Model:                 Xiaomi Redmi Router AX6000 (stock layout)
Generally working. I will make more testing later.
I wanted to run Hurricane Electric IPv6 tunnel (6in4). I had to modify kernel config and add sip.ko and tunnel4.ko (iptunnel4) to activate the tunnel. Installed manulally and works now.

Lantis
Moderator
Posts: 6910
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05

Post by Lantis »

marcinkk wrote:
Tue Jul 16, 2024 7:05 am
marcinkk wrote:
Tue Jul 09, 2024 11:36 am
Lantis wrote:
Mon May 27, 2024 6:08 pm
High chance. Sysupgrade without preserving settings.
If it works I’d be happy to add the device (as you have)
Compiled again today and finally installed:

Code: Select all

Device Name:                                            Gargoyle
Gargoyle Version:      1.15.X (Built 20240709-1351 git@66d5adbf)
Model:                 Xiaomi Redmi Router AX6000 (stock layout)
Generally working. I will make more testing later.
I wanted to run Hurricane Electric IPv6 tunnel (6in4). I had to modify kernel config and add sip.ko and tunnel4.ko (iptunnel4) to activate the tunnel. Installed manulally and works now.
Thanks, sounds good.
I have enabled the device to build. I don't know enough about it to trust the size of the initramfs files. I agree they look too big. My advice to users would be to flash OpenWrt then sysupgrade to Gargoyle.

https://github.com/ericpaulbishop/gargo ... e6f14fe271
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

angus
Posts: 34
Joined: Mon Apr 04, 2022 9:24 am

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by angus »

angus wrote:
Sun Jul 14, 2024 11:13 am
Lantis wrote:
Sun Jul 14, 2024 1:30 am
I can’t reproduce this.
Can you check the browser console for errors?
No errors were found via browser console...
Should record something for you before looking into this.
Please wait. Thanks.
Prepare a small video (a .gif file) but it cannot be attached.
Need board administrator to grant me the permission :)

Lantis
Moderator
Posts: 6910
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by Lantis »

You can’t host it here, put it on an image sharing site and link it please.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

angus
Posts: 34
Joined: Mon Apr 04, 2022 9:24 am

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by angus »

Lantis wrote:
Tue Jul 16, 2024 6:09 pm
You can’t host it here, put it on an image sharing site and link it please.
Please check the link below for more details.
https://mega.nz/file/vExUXbiL#F8WE418nT ... b94IDlKgy8

Lantis
Moderator
Posts: 6910
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.15.x BETA - 2024-05-20 - Based on OpenWrt 23.05

Post by Lantis »

I get it, but like I said unless you’re getting browser console errors it doesn’t make sense. The code is dead simple it shouldn’t be failing.
I actually expect a different part of the page is killing it.

You can dump your configs and send them to me if you like and see if I spot anything interesting.

I assume the functionality itself works? Just the GUI problem?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply