Gargoyle 1.15.x BETA - 2024-08-11 - Based on OpenWrt 23.05

[Lantis]

If you comment out the 12 changed lines in /etc/tor.firewall that should bring back the old behaviour for you.
https://github.com/ericpaulbishop/gargo ... b31157a6e4

[angus]

Hi Lantis,
Report a WebUI display issue in Connection>Advanced>Internet / WAN. Please create network interface to access upstream modem with an IP and a subnet mask. Save changes and then browse another page e.g. DHCP. After that go back Internet / WAN. You won't see any IP or subnet mask is there. Instead you have to check and uncheck "Create network interface to access upstream modem?:". Both IP and subnet mask show up.
P.S. Running 1.15.x_20240702 build on WRT3200ACM.
Thanks.

[Lantis]

Hi Lantis,
Report a WebUI display issue in Connection>Advanced>Internet / WAN. Please create network interface to access upstream modem with an IP and a subnet mask. Save changes and then browse another page e.g. DHCP. After that go back Internet / WAN. You won't see any IP or subnet mask is there. Instead you have to check and uncheck "Create network interface to access upstream modem?:". Both IP and subnet mask show up.
P.S. Running 1.15.x_20240702 build on WRT3200ACM.
Thanks.

I can’t reproduce this.
Can you check the browser console for errors?

[angus]

I can’t reproduce this.
Can you check the browser console for errors?

No errors were found via browser console...
Should record something for you before looking into this.
Please wait. Thanks.

[marcinkk]

High chance. Sysupgrade without preserving settings.
If it works I’d be happy to add the device (as you have)

Compiled again today and finally installed:

Code: Select all

Device Name:                                            Gargoyle
Gargoyle Version:      1.15.X (Built 20240709-1351 git@66d5adbf)
Model:                 Xiaomi Redmi Router AX6000 (stock layout)

Generally working. I will make more testing later.

I wanted to run Hurricane Electric IPv6 tunnel (6in4). I had to modify kernel config and add sip.ko and tunnel4.ko (iptunnel4) to activate the tunnel. Installed manulally and works now.

[Lantis]

High chance. Sysupgrade without preserving settings.
If it works I’d be happy to add the device (as you have)

Compiled again today and finally installed:

Code: Select all

Device Name:                                            Gargoyle
Gargoyle Version:      1.15.X (Built 20240709-1351 git@66d5adbf)
Model:                 Xiaomi Redmi Router AX6000 (stock layout)

Generally working. I will make more testing later.

I wanted to run Hurricane Electric IPv6 tunnel (6in4). I had to modify kernel config and add sip.ko and tunnel4.ko (iptunnel4) to activate the tunnel. Installed manulally and works now.

Thanks, sounds good.
I have enabled the device to build. I don't know enough about it to trust the size of the initramfs files. I agree they look too big. My advice to users would be to flash OpenWrt then sysupgrade to Gargoyle.

https://github.com/ericpaulbishop/gargo ... e6f14fe271

[angus]

I can’t reproduce this.
Can you check the browser console for errors?

No errors were found via browser console...
Should record something for you before looking into this.
Please wait. Thanks.

Prepare a small video (a .gif file) but it cannot be attached.
Need board administrator to grant me the permission

[Lantis]

You can’t host it here, put it on an image sharing site and link it please.

[angus]

You can’t host it here, put it on an image sharing site and link it please.

Please check the link below for more details.
https://mega.nz/file/vExUXbiL#F8WE418nT ... b94IDlKgy8

[Lantis]

I get it, but like I said unless you’re getting browser console errors it doesn’t make sense. The code is dead simple it shouldn’t be failing.
I actually expect a different part of the page is killing it.

You can dump your configs and send them to me if you like and see if I spot anything interesting.

I assume the functionality itself works? Just the GUI problem?