hello everyone, new to gargoyle but liking it very much. coming from dd-wrt for years. i have successfully installed on my wrt400n the latest rc. the only issue i am having which is a really big one for my router. i cannot detect my 5 ghz network. i am using a intel card 5300 in edubuntu latest. i searched posts but there hasn't been anything since may 2011. is there anyone out there with this device with success in the 5 ghz side? is this a known issue?
also the wireless led does not light up...
wrt-400n successful
Moderator: Moderators
wrt-400n successful
1x wndr3700v4 exp. 1.9.x
1x wndr3800 exp. 1.9.x
1x wndr4300v1 exp. 1.9.x
1x wndrmacv2 exp. 1.9.x
1x wndr3800 exp. 1.9.x
1x wndr4300v1 exp. 1.9.x
1x wndrmacv2 exp. 1.9.x
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: wrt-400n successful
Sounds like you already saw this page?
http://wiki.openwrt.org/inbox/linksys/wrt400n
----------------
For testing, you may want to disable the first radio and only try
to configure the 2nd radio - to do your 5GHZ troubleshooting.
Once you can start to see the 5GHZ mode, then re-enable the
first radio @ 2.4GHZ and see how both radio signals interact.
For 5GHZ, I think you HAVE to be in 40 mhz mode, WPA2-AES only.
http://wiki.openwrt.org/inbox/linksys/wrt400n
----------------
For testing, you may want to disable the first radio and only try
to configure the 2nd radio - to do your 5GHZ troubleshooting.
Once you can start to see the 5GHZ mode, then re-enable the
first radio @ 2.4GHZ and see how both radio signals interact.
For 5GHZ, I think you HAVE to be in 40 mhz mode, WPA2-AES only.
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400