WL500W works, wireless has issues
Moderator: Moderators
WL500W works, wireless has issues
Flashed the latest version (1.3.16) to my WL500W directly from TomatoUSB. While most of the firmware works fine, wireless does not seem to function at all, getting stuck on "Applying settings". I suspect this has something to do with its Wireless N, through I also tried the 2.4 kernel versions (1.3.9) which also doesn't work
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: WL500W works, wireless has issues
http://wiki.openwrt.org/toh/start
Always check OpenWRT supported hardware list.
Gargoyle is mainly a GUI upgrade to OpenWRT.
Eric does also do extra patches for some hardware as well.
BUT - he has to own the device to test any patches.
May have to wait for OpenWRT support.
Always check OpenWRT supported hardware list.
Gargoyle is mainly a GUI upgrade to OpenWRT.
Eric does also do extra patches for some hardware as well.
BUT - he has to own the device to test any patches.
May have to wait for OpenWRT support.
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400