It looks to me like there is a problem when uqmi checks for a PIN on the SIM (there is no PIN set on the SIM).
Any thoughts how I best move forward on this?
Device Name:Gargoyle
Gargoyle Version:1.12.0
Model:TP-Link TL-WDR3600 v1
Device Configuration:Gateway
my config is:
Code: Select all
network.wan=interface
network.wan.ipv6='0'
network.wan.peerdns='0'
network.wan.dns='208.67.222.222 208.67.220.220'
network.wan.proto='qmi'
network.wan.device='/dev/cdc-wdm0'
network.wan.apn='yesinternet'
network.wan.mobile_isp='custom'
network.wan6=interface
network.wan6.ifname='eth0.2'
network.wan6.proto='dhcpv6'
Code: Select all
Sun May 29 11:24:53 2022 daemon.notice netifd: wan (2130): Waiting for SIM initialization
Sun May 29 11:24:53 2022 daemon.notice netifd: wan (2130): Failed to parse message data
Sun May 29 11:24:53 2022 daemon.notice netifd: wan (2130): PIN status failed ()
Sun May 29 11:24:53 2022 daemon.notice netifd: wan (3828): Stopping network wan
Sun May 29 11:24:53 2022 daemon.notice netifd: wan (3828): Command failed: Permission denied
Sun May 29 11:24:53 2022 daemon.notice netifd: Interface 'wan' is now down
Code: Select all
root@Gargoyle:~# uqmi -d /dev/cdc-wdm0 --get-pin-status
"Invalid arguments given"
root@Gargoyle:~# uqmi -d /dev/cdc-wdm0 --get-capabilities
{
"max_tx_channel_rate": 3100000,
"max_rx_channel_rate": 3100000,
"data_service": "non_simultaneous_cs_ps",
"sim": "supported",
"networks": [
"gsm",
"umts"
]
}