1.13.0.x gargoyle-ispy 2021-August-15 20
Moderator: Moderators
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
You shouldn't need to.
Please try with "enforce dhcp assignments" off. Do not use this setting. If it works, let me know.
Preferably test a wired device as well, as the issue may be related to wifi only.
Otherwise you'll need to start sharing a copy of your settings so they can be checked for errors.
Status -> Overview, Connection -> Basic, DHCP
Screenshots of each page will be fine (hosted elsewhere, not attached to the forum).
Please try with "enforce dhcp assignments" off. Do not use this setting. If it works, let me know.
Preferably test a wired device as well, as the issue may be related to wifi only.
Otherwise you'll need to start sharing a copy of your settings so they can be checked for errors.
Status -> Overview, Connection -> Basic, DHCP
Screenshots of each page will be fine (hosted elsewhere, not attached to the forum).
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
-
- Posts: 20
- Joined: Sat Oct 12, 2013 5:02 pm
-
- Posts: 11
- Joined: Tue Feb 28, 2017 2:34 pm
- Location: USA
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
Lantis - I noticed you posted updated builds earlier today at:
https://lantisproject.com/gargoyle_custom/1.13.x/
Do these address what appears (to me, at least) to be a problem with the 5Ghz signal calculations on the "Connected Hosts" page? Running your build from 20210904.
I can't post a photo of this because "sorry, the board attachment quota has been reached" ... idk. What am I doing wrong there?
Anyway, the 5Ghz signal calculations are all positive figures, unlike the 2.4Ghz ones (those seem normal). Running iwinfo also reveals SNRs over 100 for 5Ghz ... again, idk, but it looks weird to me.
https://lantisproject.com/gargoyle_custom/1.13.x/
Do these address what appears (to me, at least) to be a problem with the 5Ghz signal calculations on the "Connected Hosts" page? Running your build from 20210904.
I can't post a photo of this because "sorry, the board attachment quota has been reached" ... idk. What am I doing wrong there?
Anyway, the 5Ghz signal calculations are all positive figures, unlike the 2.4Ghz ones (those seem normal). Running iwinfo also reveals SNRs over 100 for 5Ghz ... again, idk, but it looks weird to me.
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
No fixes for that. Can you post a screenshot at somewhere external (e.g. Imgur?) And link it here?
The output from iwinfo for both 2.4 and 5ghz would be good to compare as well.
Also what device you're running please.
Edit:
Might as well give the output of this per phy0/1 as well
iw phy0 station dump
I'm leaning towards a driver issue not reporting the value correctly, but always a chance the code is doing something strange.
The output from iwinfo for both 2.4 and 5ghz would be good to compare as well.
Also what device you're running please.
Edit:
Might as well give the output of this per phy0/1 as well
iw phy0 station dump
I'm leaning towards a driver issue not reporting the value correctly, but always a chance the code is doing something strange.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
Yes, they overlap but i have same setting on 1.12 and it works well without any problem.nightanole wrote: ↑Thu Sep 23, 2021 7:40 amDHCP and Static pools dont overlap do they? I have static .2-.99, and DHCP .100-.199
I solved my problem which makes internet stops working after adding some clients to static ip assignment.
The problem was i used "+" sign and space bar in hostname field. E.g. "vu+", "HP printer".
I use hostnames including these signs on 1.12 and there never was any problem, 1.12 allows to use "+" sign. So i used similar hostnames on 1.13 image. There was not any warning that i'm going to use forbidden signs, configuration was saved.
After removing them from hostname field it works.
Guys, thank you for your suggestions to solve my problem. And thank you for your effort to develop Gargoyle. You make great job!
now x86 1.15 beta
wrt32x
archer c6
archer c2
archer c7
tl-wr1043ND
wrt32x
archer c6
archer c2
archer c7
tl-wr1043ND
-
- Posts: 11
- Joined: Tue Feb 28, 2017 2:34 pm
- Location: USA
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
Lantis - just PMed you a link.
Edit: Device is a TP-Link Archer C7 v5. Seen the same on a C7 v2 and A7 v5, so it would appear to affect the C7/A7 models across the board.
Edit: Device is a TP-Link Archer C7 v5. Seen the same on a C7 v2 and A7 v5, so it would appear to affect the C7/A7 models across the board.
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
PM received. Haven't dug into the data yet.
Anyone else with an Archer C7 V5 (or similar device, there's a few clones) seeing the same behaviour?
Anyone else with an Archer C7 V5 (or similar device, there's a few clones) seeing the same behaviour?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
Had the same problem with previous build April 1.13.0, tried to assign every device a static IP and devices can't connect to router. Solution for me was to revert back to last stable 1.12.tob99 wrote: ↑Tue Sep 21, 2021 2:36 pmI've tested it a little bit more and now i know that turning on "enforce dhcp assignments" does not matter.
I made clean instal 1.13 image again. I made configuration in this order: router ip (lan ip), dhcp range, wireless AP. In the end i've added static ip assignment for HP printer and saved.
After that internet stopped to work. Internet does not work as was written before (no internet over lan and wifi. Wireless devices are trying to connect AP but can not get ip address).
I tried to set static ip on connected devices and this was good idea.
It looks like dhcp server (automatic ip assignment) stops to work when even one client device is added to static ip. I don't know why. And there is no difference between "enforce dhcp assignments" checked or not.
I'm using an Archer C7 v2.
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
Hi all,
It works fine on my linksys wrt3200!!!
There is only one thing, wpa3 does not seems to work.
My wireless clients, e.g. mobiles, tablets, laptops even some smart home devices keep trying to connect and they give up after a couple of times.
Given that they are so many devices with this issue and that reverting back to wpa2 everything works as expected I believe it is some kind of wrt3200 and wpa3 bug.
It works fine on my linksys wrt3200!!!
There is only one thing, wpa3 does not seems to work.
My wireless clients, e.g. mobiles, tablets, laptops even some smart home devices keep trying to connect and they give up after a couple of times.
Given that they are so many devices with this issue and that reverting back to wpa2 everything works as expected I believe it is some kind of wrt3200 and wpa3 bug.
Re: 1.13.0.x gargoyle-ispy 2021-August-15 20
It is a mwlwifi (the driver for that device) and wpa3 bug. It won't ever work, sorry.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.