Hello Guys!
Just wanted to share that i got this Firmware:
gargoyle_1.13.x-mvebu-cortexa9-cznic_turris-omnia-sysupgrade.img.gz
flashed succesfully on my Turris Omnia (got this Router last Week)
i got the file from romanhk (point) cz and used the "5-Led Rescue Method" described on openWRT.
So basically set Router to 5LED Rescue mode, connect via SSH, put FAT32 USB Stick on Front USB (where you put the .img flash file in it, don't forget to extract from img.gz before) and enter following in the Command-Line:
1: mkdir /mnt
2: mount /dev/sda1 /mnt
3: dd if=/mnt/gargoyle_1.13.x-mvebu-cortexa9-cznic_turris-omnia-sysupgrade.img of=/dev/mmcblk0 bs=4096 conv=fsync
then press reset button shortly, and let the Router alone for ~5min
and voila, Gargoyle booted.
Flash Success 1.13.x on Turris Omnia (without Serial Cable)
Moderator: Moderators
-
- Posts: 1
- Joined: Tue Apr 13, 2021 10:12 am