Version 1.3.14
Moderator: Moderators
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Version 1.3.14
Google Chrome just released a Beta 12.x versionEric wrote: New in 1.3.14:
- Fix display of bandwidth monitor page in chrome
- Reset and reboot buttons now work on D-link DIR-825b and Buffalo WZR HP-G300NH
Seems to work MUCH better than Google Chrome 11 beta
Bandwidth monitor seems to show fine now.
I'll test reset and reboot buttons when I get home.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 34
- Joined: Mon Feb 28, 2011 4:27 pm
Re: Version 1.3.14
I'm using two TL-WR1043ND:s and one of them seem to cause problems much more often. The one that couldn't use 1.3.13, when tasked with being an AP, without constantly becoming unreponsive is a hardware version 1.8. I'm now trying to use it as a WDS client with 1.3.14 but it doesn't work completely. I get an WDS connection and from telnet I can ping any site on the internet just fine, but from windows I can only see the main router and the client router and nothing else. I supect it needs some kind of additional routing setting.
The other one is a V 1.7 and is now serving as an AP+WDS and hasn't hung once with 1.3.14. It also functioned as a working WDS client before without any further settings (with 1.3.11).
May I submit for your consideration, that the trouble people have had with TL-WR1043ND:s that you haven't been able to reproduce perhaps has to do with you using different hardware versions?
The other one is a V 1.7 and is now serving as an AP+WDS and hasn't hung once with 1.3.14. It also functioned as a working WDS client before without any further settings (with 1.3.11).
May I submit for your consideration, that the trouble people have had with TL-WR1043ND:s that you haven't been able to reproduce perhaps has to do with you using different hardware versions?
Re: Version 1.3.14
I am running 1.3.14 on my Netgear WNDR3700 v1 they are working fine after I go through and configure the settings from scratch. I don't have the blank connected hosts info like other members here.
However, the backup configuration from Gargoyle version 1.3.13 does not work. At first I thought maybe the problem due to incompatibility between different revision. However, after I re-flashed the router with the old firmware 1.3.13; then tried to restore the backup configuration. I encountered the same problem. Internet dropped and I could not connect to the router until I re-flashed the firmware again.
However, the backup configuration from Gargoyle version 1.3.13 does not work. At first I thought maybe the problem due to incompatibility between different revision. However, after I re-flashed the router with the old firmware 1.3.13; then tried to restore the backup configuration. I encountered the same problem. Internet dropped and I could not connect to the router until I re-flashed the firmware again.
Re: Version 1.3.14
config loses after restart, dir-300 1.3.13 1.3.14
Re: Version 1.3.14
Got a solution for the blank hosts section on 1.3.14 ....
That's it, no router reboot required. You can also just download the file directly to router if you don't want to use a USB drive.
Code: Select all
1. Download updated define_hosts_vars.sh here http://www.gargoyle-router.com/gargoyle/projects/gargoyle/repository/revisions/9fd4ae0267f6e242a0e581f424f044a627c06c1b/changes/package/gargoyle/files/usr/lib/gargoyle/define_host_vars.sh (click Download)
2. Copy that file to a usb stick, place usb stick into router and setup USB share on it
3. SSH router (can use Putty in windows) , type "find -name define_host_vars.sh" . You should get a list of result, one of them being the file on the USB drive (example: /tmp/usb_mount/*/define_host_vars.sh)
4. Type "cp /tmp/usb_mount/*/define_host_vars.sh /usr/lib/gargoyle/" (use correct paths)
-
- Posts: 38
- Joined: Thu Jan 13, 2011 11:39 pm
Re: Version 1.3.14
opendns ddns is not working in TP link WR941ND ver 2.2
if wireless mode B+G+N is selected wireless light doesn't come up and needs a lot of time for applying configuration changes.
Other than that everything seems fine.
if wireless mode B+G+N is selected wireless light doesn't come up and needs a lot of time for applying configuration changes.
Other than that everything seems fine.
Re: Version 1.3.14
stupid question. Without using USB. How do you download the host_var.sh to the router?
Re: Version 1.3.14
Use WinSCP, SSH to the router and edit the file. Pretty simple.
Re: Version 1.3.14
Ha! I still don't know how to edit.
I used Putty. Logged in as root. Manage to figure how to navigate to the directory /usr/lib/gargoyle/
I have tried...
cp http://www.gargoyle-router.com/gargoyle ... st_vars.sh /usr/lib/gargoyle/
source http://www.gargoyle-router.com/gargoyle ... st_vars.sh /usr/lib/gargoyle/
I have no idea how to use SSH. What is the command line I should use?
I used Putty. Logged in as root. Manage to figure how to navigate to the directory /usr/lib/gargoyle/
I have tried...
cp http://www.gargoyle-router.com/gargoyle ... st_vars.sh /usr/lib/gargoyle/
source http://www.gargoyle-router.com/gargoyle ... st_vars.sh /usr/lib/gargoyle/
I have no idea how to use SSH. What is the command line I should use?