Code: Select all
cat /etc/config/wireless
Code: Select all
iw phy0 info
iw phy1 info
Code: Select all
iw reg get
Code: Select all
cat /tmp/cached_basic_vars
Moderator: Moderators
Code: Select all
cat /etc/config/wireless
Code: Select all
iw phy0 info
iw phy1 info
Code: Select all
iw reg get
Code: Select all
cat /tmp/cached_basic_vars
Code: Select all
Frequencies:
* 5180 MHz [36] (20.0 dBm)
* 5200 MHz [40] (20.0 dBm)
* 5220 MHz [44] (20.0 dBm)
* 5240 MHz [48] (20.0 dBm)
* 5260 MHz [52] (20.0 dBm) (no IR, radar detection)
* 5280 MHz [56] (20.0 dBm) (no IR, radar detection)
* 5300 MHz [60] (20.0 dBm) (no IR, radar detection)
* 5320 MHz [64] (20.0 dBm) (no IR, radar detection)
* 5500 MHz [100] (20.0 dBm) (no IR, radar detection)
* 5520 MHz [104] (20.0 dBm) (no IR, radar detection)
* 5540 MHz [108] (20.0 dBm) (no IR, radar detection)
* 5560 MHz [112] (20.0 dBm) (no IR, radar detection)
* 5580 MHz [116] (20.0 dBm) (no IR, radar detection)
* 5600 MHz [120] (20.0 dBm) (no IR, radar detection)
* 5620 MHz [124] (20.0 dBm) (no IR, radar detection)
* 5640 MHz [128] (20.0 dBm) (no IR, radar detection)
* 5660 MHz [132] (20.0 dBm) (no IR, radar detection)
* 5680 MHz [136] (20.0 dBm) (no IR, radar detection)
* 5700 MHz [140] (20.0 dBm) (no IR, radar detection)
* 5720 MHz [144] (20.0 dBm) (no IR, radar detection)
* 5745 MHz [149] (20.0 dBm) (no IR)
* 5765 MHz [153] (20.0 dBm) (no IR)
* 5785 MHz [157] (20.0 dBm) (no IR)
* 5805 MHz [161] (20.0 dBm) (no IR)
* 5825 MHz [165] (20.0 dBm) (no IR)
* 5845 MHz [169] (disabled)
* 5865 MHz [173] (disabled)
Code: Select all
uci set wireless.radio0.country='US'
uci set wireless.radio1.country='US'
uci commit wireless
wifi
So the way it is supposed to work is on first boot Gargoyle tries to detect what country you are from and offer that option. If it can't detect it, the option isn't provided. Once you pick one, the option is gone (pick once to avoid abuse).Maniac wrote:Yes, just figured that out. I was not aware of those commands. I manually edited /etc/config/wireless to set the country code to 'US'.
Now both channels 100 & 149 work, thanks! So it appears the root issue is that the country code selection is not showing up in the UI.
Thank you for your help!