Hi All,
QoS worked flawlessly until after Webcam has been enabled. Knowing that Webcam is not a passionately pursued feature, just wonder if this is a known issue.
Thanks
Webcam : Logitech Webcam C210 (UVC Camera 046d:0819)
Webcam + QoS issue, 1.11.X (Built 20190405-0155 git@4685bd7f)
Moderator: Moderators
Webcam + QoS issue, 1.11.X (Built 20190405-0155 git@4685bd7f)
Last edited by ysy on Fri Apr 19, 2019 9:02 pm, edited 1 time in total.
Re: 1.11.X (Built 20190405-0155 git@4685bd7f) Webcam + QoS issue
It might not be enough for the CPU.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: 1.11.X (Built 20190405-0155 git@4685bd7f) Webcam + QoS issue
Thanks for the reply. Webcam seems to consume 8% cpu with 640x480 15fps setting.
Just found something new this morning: under Gargoyle UI's Status\Connection List page, QoS Up/Down column shows NA after enabling Webcam. It shows Normal or Priority (my setup) class prior to that.
Just found something new this morning: under Gargoyle UI's Status\Connection List page, QoS Up/Down column shows NA after enabling Webcam. It shows Normal or Priority (my setup) class prior to that.