ViBE wrote:may i already noticed, not sure: on the bandwidth site if i set the time frame to months it shows the date in mm yyyy format. is it possible to swap this too? in hungarian we use yyyy mm format. aligning this column to the left would be also cool.
You will find it already in the latest beta versions.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
ViBE wrote:may i already noticed, not sure: on the bandwidth site if i set the time frame to months it shows the date in mm yyyy format. is it possible to swap this too? in hungarian we use yyyy mm format. aligning this column to the left would be also cool.
You will find it already in the latest beta versions.
The fixed value is not good. Otherwise, I agree to follow the layout from here in the time setting (I've reduced the post because of the big screens): ScreenShot 1. ScreenShot 2. ScreenShot 3.
EDIT2: If I set the date according to the 1st screen, the value in the 2nd screen is unchanged.
EDIT3: and according to the third screen, it didn't change (only . to /), but the order remained.
You may need to go through all the sections where the date and time is.
Last edited by RomanHK on Fri Apr 05, 2019 10:20 am, edited 3 times in total.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
I understand the issue now. I’ll look at it later.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
I believe all of the dateformat issues should now be fixed. If you spot more please let me know.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
I want to buy a new router because mine old TL-WR941ND have only 4 MB flash and 1.11.0 require 8 MB flash. Where I cand find a list with all supported routers by 1.11.0 and future routers in plan for 1.11.0
P.S - C60 MIMO vs C60 ,or others MIMO vs normal model.
Install on a Western Digital N750 without issue so far. I have a pretty basic setup but seem fine.
I also have TP-link WR-1043ND v1 as a backup which I update too. For curiosity I am wondering which one is the better router. The WD has the 5 Ghz band and more memory but the TP has 3 antennas for wi-fi.
WR1043 v1 is only a draft spec n device so comes with its own challenges.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
mrouilla515 wrote:Install on a Western Digital N750 without issue so far. I have a pretty basic setup but seem fine.
I also have TP-link WR-1043ND v1 as a backup which I update too. For curiosity I am wondering which one is the better router. The WD has the 5 Ghz band and more memory but the TP has 3 antennas for wi-fi.
If I remember correctly, the My Net 750 has 6 antennas wi-fi.
mrouilla515 wrote:Install on a Western Digital N750 without issue so far. I have a pretty basic setup but seem fine.
I also have TP-link WR-1043ND v1 as a backup which I update too. For curiosity I am wondering which one is the better router. The WD has the 5 Ghz band and more memory but the TP has 3 antennas for wi-fi.
If I remember correctly, the My Net 750 has 6 antennas wi-fi.
Anyway, WD is much more powerful than 1043ND.
Last edited by RomanHK on Fri Apr 19, 2019 8:27 am, edited 1 time in total.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users