Hello, i'm having a after build problem with lastest version 1.10.x 68ce297 with gargoyle.The problem is the gargoyle system seems to not seeing more ram than 916728k total ram.If i set ram size from vmware workstation 2 gb, that value still doesn't change.
https://pasteboard.co/Hfk4WVs.png
Is there a kernel build option that i don't choose, any help would be good
Here is the build config
https://paste.ofcode.org/3aHmGC3jBD3EUpxNkYJ36ns
Best regards.
Building a x86 VM image but gargoyle ram doesn't scale
Moderator: Moderators
Re: Building a x86 VM image but gargoyle ram doesn't scale
If you want to stick with x86_generic, then you should set:
Maybe also check that CONFIG_NOHIGHMEM is not set.
I think switching to x86_64 would achieve the same result (obviously by switching to a 64 bit architecture)
Code: Select all
CONFIG_HIGHMEM=y
CONFIG_HIGHMEM4G=y
I think switching to x86_64 would achieve the same result (obviously by switching to a 64 bit architecture)
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Building a x86 VM image but gargoyle ram doesn't scale
Thanks for suggestion, i tried with x86 with
but no luck, then i tried x64 build but x64 didn't even boot, on vmware halted on waiting for root device.VirtualBox doesn't get ahead from grub loader.
How can i build an older version, will try if someone helps.
Anyway some folks asked for images, here they are.
https://www.oguska.com/gargoyle/x86/
Code: Select all
CONFIG_HIGHMEM=y
CONFIG_HIGHMEM4G=y
but no luck, then i tried x64 build but x64 didn't even boot, on vmware halted on waiting for root device.VirtualBox doesn't get ahead from grub loader.
How can i build an older version, will try if someone helps.
Anyway some folks asked for images, here they are.
https://www.oguska.com/gargoyle/x86/
-
- Posts: 25
- Joined: Sun Dec 13, 2015 12:53 am
Re: Building a x86 VM image but gargoyle ram doesn't scale
https://github.com/fengchen-github/gargoyle
It's my git above.Fixed somethings with target x86 and x86-64.
And your image i tryed is booting ok with gargoyle_1.10.x-x86-generic-combined-ext4.vdi.
It's my git above.Fixed somethings with target x86 and x86-64.
And your image i tryed is booting ok with gargoyle_1.10.x-x86-generic-combined-ext4.vdi.
J1900 x86-64 fanless computer: Gargoyle 1.10.X
Netgear wndr4300v1&wndr3700v4: sold out
ASUS ACRH17 :asuswrt as AP
N270 x86 fanless computer: Gargoyle 1.10.X
TP-LINK C7V2:OpenWrt18.06.1 as AP
TP-LINK TL-WR741V4:switch
Netgear wndr4300v1&wndr3700v4: sold out
ASUS ACRH17 :asuswrt as AP
N270 x86 fanless computer: Gargoyle 1.10.X
TP-LINK C7V2:OpenWrt18.06.1 as AP
TP-LINK TL-WR741V4:switch
Re: Building a x86 VM image but gargoyle ram doesn't scale
Hello again after a long time, if anyone needs those images you can get them here. VDI, VMDK both here.
https://mega.nz/folder/9GYXDA6J#sss7LsYfuG7i7JwITYPdZA
https://mega.nz/folder/9GYXDA6J#sss7LsYfuG7i7JwITYPdZA
Re: Building a x86 VM image but gargoyle ram doesn't scale
Do you know what the solution was in the end?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.