Max 100Mbps speed on wired connection WDR4300

[jpomykala]

Hello,
i'm using Gargoyle 1.8.1 on WDR4300 v1.
Wired connection
Direct connection to modem i'm getting 280Mbps/480Mbps
Wired connection through WDR4300 with Gargoyle 100Mbps/100Mbps

How can I improve speed through router. I'm not using QoS

[Lantis]

You're at the maximum of your routers CPU limits.
You cannot improve it.

The stock firmware uses hardware acceleration to go faster.
Third party firmware cannot do this.

[tapper]

Btw 1.9.2 is much better than 1.8.1 imo

[jorgecorazondeleon]

Hi:
router: wdr4300 v1
Gargoyle version:1.9.X (Built 20170414-1611 git@c37f4bb
DHCP (wired)
QoS: NO
My internet provider has uploaded the speed at 100 Mbps.
I get that speed with the modem.
With the router I did not reach 51 Mbps.
(PING:16 ms DESCARGA:50.83 Mbps CARGA:8.30 Mbps)
I want to revert, (if there is no other solution) to the stock firmware.
Is it possible via the web?
Do I need the stock firmware to be just "up" or can it be up boot?
I only found a firmware stock up: wdr4300v1_en_3_13_31_up (130319)

[jorgecorazondeleon]

Before returning to the firmware stock, I tried
"Restore Default Configuration" and reconfigured it, without using QoS and solved the problem, now if I achieve the 100 mbps,
I like gargoyle and did not want to leave it

PING
16 ms
DESCARGA
100.44 Mbps
CARGA
8.10 Mbps