Hi all,
I've been running 1.8.1 on a TP-Link Archer C7 for a couple months now and I finally got around to trying to setup the blacklist and whitelists. I got partway through setting it up and the router started to reboot. I have removed all of the blacklist and whitelist rules and the rebooting remains. I have not been able to load configuration defaults or upgrade the firmware or anything to fix the problems.
I would love some help in getting my network back.
Statik
Constant Reboots on Archer C7
Moderator: Moderators
Re: Constant Reboots on Archer C7
Unplug your router from the WAN to see if it stops rebooting.
If it does, then you should purge your bandwidth usage data as per the following thread: viewtopic.php?f=5&t=8948&p=39584&hilit= ... nin#p39584
If it doesn't stop rebooting when disconnected from WAN, do a failsafe reset.
If it does, then you should purge your bandwidth usage data as per the following thread: viewtopic.php?f=5&t=8948&p=39584&hilit= ... nin#p39584
If it doesn't stop rebooting when disconnected from WAN, do a failsafe reset.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Constant Reboots on Archer C7
Thanks, deleting the BWMon files worked!
Now I need to look into upgrading to 1.9.1 I guess.
Now I need to look into upgrading to 1.9.1 I guess.