new Build

[nworbnhoj]

This has become a much bigger task than anticipated

You need a hand?

[Lantis]

Thanks for the offer. I'll do this one solo but I'll message you for bug testing.
I'm coming down with a cold so it's taking ages to solve problems. Heads so fuzzy. Spent ages just staring at the screen lol.

[Lantis]

alright so i've been working on fixing wireless bridge configs. and i've found other items are broken. mostly my fault.

I'm now working to fix:
- DHCP Wireless + Static Wireless
* Client - Config worked, but only out of pure coincidence. The gui will respond much more favourably when i'm done.
* Client + AP - Pretty well borked. Config worked but AP didn't.

- Wireless Bridge
* Repeater disabled - I'll be moving this to using a new method. It seems to work much better, theres a small issue of routing to be worked out but so far so good.
* Repeater enabled - Will use the same new method.

This has become a much bigger task than anticipated so i'm looking at 1-2 weeks for a fix (that will then need bug testing).
As far as progress, i've actually fixed the GUI for all of DHCP Wireless + Static wireless, i just need to ensure that the Save Changes button responds as expected.

I appreciate everyones patience and i apologise for mucking this one up!

Wireless DHCP and Static Wireless are now completely fixed (pending extensive bug testing).
On to Wireless Bridges

[ispyisail]

+1

[tapper]

thanks for your work Lantis ready to test wen you are dun.

[Lantis]

Finished implementing.

Now going to spend an extra week attempting to test for devices that don't have Wireless N capability or only have 1 radio.
Which is a pain, but oh well.

https://www.diffchecker.com/evelr6hv

[scrmtrey]

@ISPY

when will you release new build (working stable all good) of gargoyle 1.9.x ?


Thanks for answer.

[tapper]

Hi wen you lot bump to cc 15.1 woch out for a kernel bug.

>One note about the kernel version: 3.18.23 is a very unfortunate choice, as
>it contains a regression causing nondeterministic boot hangs (caused by a
>faulty backport), which is very easy to trigger on some hardware. This has
>been fixed in 3.18.24 (see [1]).

The latest code has a kernel update to 3.18.27.

https://forum.openwrt.org/viewtopic.php?id=63426

[dragonmax]

Yes please upload them for us
I need the fimware "gargoyle_1.9.x-ramips-mt7620-wt3020-8M-squashfs-sysupgrade.bin"
thanks

[scrmtrey]

no new builds ?