Gargoyle 1.5.1 is not working in Client+AP mode
Moderator: Moderators
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Yes, I´ve already done it... many times!!
As bridge works I can navigate inside Ana´s range (192.168.0.X), Client works as well, everything works... just Client AP not!!
Is there any kind of log somewhere to allow me to get more details about this freaking error? Gargoyle logs ?
Regards,
As bridge works I can navigate inside Ana´s range (192.168.0.X), Client works as well, everything works... just Client AP not!!
Is there any kind of log somewhere to allow me to get more details about this freaking error? Gargoyle logs ?
Regards,
Re: Gargoyle 1.5.1 is not working in Client+AP mode
I haven't been following this thread but have decided to do some tests
TP-Link TL-WR1043ND v1-1.8
1.5.1
fresh install with nothing running (e.g tor)
When setting up "Client + AP" the router did some strange things. In fact the connection to the internet stopped. I rebooted the router and every thing in running perfect.
I would like to pint out that both wireless connections are not encrypted
Will see how long "client + AP" runs for?
TP-Link TL-WR1043ND v1-1.8
1.5.1
fresh install with nothing running (e.g tor)
When setting up "Client + AP" the router did some strange things. In fact the connection to the internet stopped. I rebooted the router and every thing in running perfect.
I would like to pint out that both wireless connections are not encrypted
Will see how long "client + AP" runs for?
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Hi ispyisail,
I changed to "No Encryptation" and nothing changed, even given a boot on router... It´s a freaking error this...
I put enclosed my configuration to you have a look at it.
Any new ideas guys? Moderators is there any Gargoyle with new drives to TPLINK 1043 that I could test?
still looking for solutions...
Regards,
I changed to "No Encryptation" and nothing changed, even given a boot on router... It´s a freaking error this...
I put enclosed my configuration to you have a look at it.
Any new ideas guys? Moderators is there any Gargoyle with new drives to TPLINK 1043 that I could test?
still looking for solutions...
Regards,
- Attachments
-
- No Authe
- WirelessNoAuth.PNG (32.87 KiB) Viewed 6033 times
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Are both your routers on the same subnet?I changed to "No Encryptation" and nothing changed, even given a boot on router... It´s a freaking error this...
I put enclosed my configuration to you have a look at it.
Any new ideas guys? Moderators is there any Gargoyle with new drives to TPLINK 1043 that I could test?
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Hi ispyisail,
So, my Ana's router is over 192.168.0.X range, and I'm creating a new LAN over 192.168.1.X, it means different networks.
I saw you got success with no encryption, could you try with WPA2 PSK and check out if it works well in both Wireless networks?
I guess that our only different point would be the router version, my is TP-Link TL-WR1043ND v1.6. May it be the cause?
Let me know for news...
Regards,
So, my Ana's router is over 192.168.0.X range, and I'm creating a new LAN over 192.168.1.X, it means different networks.
I saw you got success with no encryption, could you try with WPA2 PSK and check out if it works well in both Wireless networks?
I guess that our only different point would be the router version, my is TP-Link TL-WR1043ND v1.6. May it be the cause?
Let me know for news...
Regards,
Re: Gargoyle 1.5.1 is not working in Client+AP mode
TrueI guess that our only different point would be the router version, my is TP-Link TL-WR1043ND v1.6. May it be the cause?
http://www.gargoyle-router.com/wiki/dok ... nt_ap_mode
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
so, how can I solve this?
Is there any update to my version 1.6, driver etc, etc.... ?
Anyone has the same version mine to try it out and see if it happens as well ?
Let me know.
Thanks!!!
Is there any update to my version 1.6, driver etc, etc.... ?
Anyone has the same version mine to try it out and see if it happens as well ?
Let me know.
Thanks!!!
Last edited by ofbizbrazil on Sat Dec 17, 2011 5:49 pm, edited 1 time in total.
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
ispyisail,
Could you check out if using WPA2-PSK works too ?
Maybe the problem is this....
Please try it with yours..
Could you check out if using WPA2-PSK works too ?
Maybe the problem is this....
Please try it with yours..
Re: Gargoyle 1.5.1 is not working in Client+AP mode
I'm am trying but my router has spat the dummy when trying to reconfigureofbizbrazil wrote:ispyisail,
Could you check out if using WPA2-PSK works too ?
Maybe the problem is this....
Please try it with yours..
I now need to reset the router using fail safe