archer c7 ac1750

[chrismallia]

*Installed Gargoyle 1.8 on a Archer C7 (latest I think), and 5 GHz seems to work fine.. Had an issue connecting to a sat modem through WAN, internet didn't want to work. So I'm using the C7 for another role.

I'm trying a WDR3600 in the original role as WAN keeper, need to get a good firmware for that...

Did you try turning off the modem for a few minutes and turn back on the modem leave it on for 5min then turn on the archer c7?

[tapper]

Hi all c7's should be flashed to the latest build found here:
viewtopic.php?f=14&t=8289
With this build you will get proper ac with out using the command line. I have it installed on 2 c7s all is good.

[James__uk]

*Installed Gargoyle 1.8 on a Archer C7 (latest I think), and 5 GHz seems to work fine.. Had an issue connecting to a sat modem through WAN, internet didn't want to work. So I'm using the C7 for another role.

I'm trying a WDR3600 in the original role as WAN keeper, need to get a good firmware for that...

Did you try turning off the modem for a few minutes and turn back on the modem leave it on for 5min then turn on the archer c7?

I think so.. Maybe I could try leaving the modem off and then on for longer... But maybe gargoyle 1.9 would be better..

The job is an important one (getting family online), so I need a solid install.

The C7 is working fine at mine... Maybe the issue was with the sat modem..
I'm trying a wdr3600 with the sat modem next

Thanks for reply... Hi I'm James

[chrismallia]

Its not gargoyle it is the modem not giving out a new ip try turning off the modem for a long time if it is a cable modem unscrew the cable coming from the ISP for about 10 sec as the IP will be lost and a new IP will be requested

[James__uk]

Its not gargoyle it is the modem not giving out a new ip try turning off the modem for a long time if it is a cable modem unscrew the cable coming from the ISP for about 10 sec as the IP will be lost and a new IP will be requested

I got a new IP at various points, but used the static IP connection option, and just put in the values... I can retry using the dhcp connection option, but since I was there all day, I moved on to keeping the C7 for me, and trying a different box (wdr3600) on it

I'll try 1.9.1 on the 3600, and try the dhcp connect.. It's a sat modem with a thick cable...

[James__uk]

Update:

Archer C7 (Gargoyle 1.8.1) is working perfectly behind a Draytek DSL modem.
TP-Link WRD3600 (Gargoyle 1.8.1) is working perfectly behind a Tooway SatModem..



Thanks for the help..

[tapper]

*Installed Gargoyle 1.8 on a Archer C7 (latest I think), and 5 GHz seems to work fine.. Had an issue connecting to a sat modem through WAN, internet didn't want to work. So I'm using the C7 for another role.

I'm trying a WDR3600 in the original role as WAN keeper, need to get a good firmware for that...

Hi your sat modem should work in this build.
v ... =14&t=8247

You can flash the wdr3600 with Gargoyle too, from the same link.

[mandon]

Can you put gargoyle in tp-link archer ac c7 1750 v1 even losing the 5GHz band?
Thanks