- fis list.jpg (104.64 KiB) Viewed 25800 times
Gargoyle on D-Link DIR-300
Moderator: Moderators
Re: Gargoyle on D-Link DIR-300
fis list
Re: Gargoyle on D-Link DIR-300
Alright, let's try this again.... No guarantees since I don't own a DIR300, but the new version works with my current routers and detects flash addresses and flash size dynamically.
Since I'd like to confirm with you that it works before making it the official download, I've posted the new version separately here. (Use this and not the download in the download section)
Please let me know if it works, and if it doesn't it would help if in addition to letting me know what error messages are printed out you could run the fis list command again so I can see what's going on. Thanks!
Since I'd like to confirm with you that it works before making it the official download, I've posted the new version separately here. (Use this and not the download in the download section)
Please let me know if it works, and if it doesn't it would help if in addition to letting me know what error messages are printed out you could run the fis list command again so I can see what's going on. Thanks!
Re: Gargoyle on D-Link DIR-300
can confirm new version loads with windows xp with out c++ installed
Re: Gargoyle on D-Link DIR-300
Fon Flash / D-link router get into a locked state
hang on its still working, ill send this post anyway
hang on its still working, ill send this post anyway
Re: Gargoyle on D-Link DIR-300
I'm jumping up and down with excitement
IT WORKED
I need to test the router now and see if i can get that to work
Did i tell you i was jumping up and down
IT WORKED
I need to test the router now and see if i can get that to work
Did i tell you i was jumping up and down

Re: Gargoyle on D-Link DIR-300
I'm having trouble getting the config web page
I can't find a broadcast SSID
My PC is pulling a IP address form port 1 on the router but i can't connect to 192.168.1.10
I notice when the router finishes booting there is no command prompt?
I'm going to try gargoyle beta instead of bleeding edge!
I can't find a broadcast SSID
My PC is pulling a IP address form port 1 on the router but i can't connect to 192.168.1.10
I notice when the router finishes booting there is no command prompt?
I'm going to try gargoyle beta instead of bleeding edge!
Re: Gargoyle on D-Link DIR-300
The router comes up on IP 192.168.1.1, not 192.168.1.10.
There's no SSID because the wireless is inactive by default until you configure it.
There's no SSID because the wireless is inactive by default until you configure it.
Re: Gargoyle on D-Link DIR-300
duhh
sorry i got 192.168.1.10 <-> 192.168.1.1 arouind the wrong way
I've reflashed using windows xp with no c++ to beta version 4
192.168.1.1 works .
just finding user name and password
sorry i got 192.168.1.10 <-> 192.168.1.1 arouind the wrong way
I've reflashed using windows xp with no c++ to beta version 4
I needed to hit enterI notice when the router finishes booting there is no command prompt?
192.168.1.1 works .
just finding user name and password