WRT3200ACM
Moderator: Moderators
Re: WRT3200ACM
thx for the quick answer, I just did it, looks like working
-
mojolacerator
- Posts: 54
- Joined: Wed Jun 15, 2016 11:24 am
- Location: Canada
Re: WRT3200ACM
Is the same true with x86/64 image? Can I just flash Gargoyle from the upgrade screen in Openwrt?
Gargoyle
i5-3550, 8gb ram, 120gb ssd
i5-3550, 8gb ram, 120gb ssd
Re: WRT3200ACM
Never tried sorry
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: WRT3200ACM
hi,
I have the router up for about 10 days, I had 2 issues, once the power went out and I lost the quota, actually it just changed I had all three setting upload 5MB, download 50MB and total 5GB, then after the power went out I had just the down 50MB the rest disappered from the status but in the firewall settings the quota was ok. Same thing happened when I saved a restriction, can you take a look, thx.
I have the router up for about 10 days, I had 2 issues, once the power went out and I lost the quota, actually it just changed I had all three setting upload 5MB, download 50MB and total 5GB, then after the power went out I had just the down 50MB the rest disappered from the status but in the firewall settings the quota was ok. Same thing happened when I saved a restriction, can you take a look, thx.
Re: WRT3200ACM
Please be far more specific.
I can’t replicate the issue by just turning the router off and on again.
I can’t replicate the issue by just turning the router off and on again.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: WRT3200ACM
hi
thx, for the answer
I lost power so to replicate that you will need to unplug the power from the router then plug it back; the settings what I had was 5up, 50down and 5GB for total with slowing down the connection to 2up and 15down when the max was reached. Only the 50down was there in the quota status after the router restart.
Another thing what happened was I saved a restriction in the firewall (restricting access to an IP address from my network) and again the status had just the 50down the rest disappeared after I saved the settings.
Today I added a static IP address and after I saved it I checked the status of the qouta and the status showed only the 50down.
So it is looks like after you save a settings the status of the quota will be changed also, however in the firewall settings the qouta is still there.
Apparently there should be no connection between saving other settings and the status of the qouta but my router has that prb.
thx
thx, for the answer
I lost power so to replicate that you will need to unplug the power from the router then plug it back; the settings what I had was 5up, 50down and 5GB for total with slowing down the connection to 2up and 15down when the max was reached. Only the 50down was there in the quota status after the router restart.
Another thing what happened was I saved a restriction in the firewall (restricting access to an IP address from my network) and again the status had just the 50down the rest disappeared after I saved the settings.
Today I added a static IP address and after I saved it I checked the status of the qouta and the status showed only the 50down.
So it is looks like after you save a settings the status of the quota will be changed also, however in the firewall settings the qouta is still there.
Apparently there should be no connection between saving other settings and the status of the qouta but my router has that prb.
thx