pppoe not connecting WRT1200AC

[Lantis]

Compare the /etc/config/network between openwrt and gargoyle and see if anything sticks out.

Like I said, it will report that IP address until PPPoE connects.
Until then it's essentially a DHCP client.

[satstuff]

Thanks for persisting with me.
As suggested I compared the two network confog files and they are identical between Gargoyle and OprnWRT
Here is the connection log from Gargoyle.

Code: Select all

Fri Nov  6 22:33:28 2015 daemon.notice netifd: Interface 'wan' is setting up now
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: Plugin rp-pppoe.so loaded.
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.7
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: pppd 2.4.7 started by root, uid 0
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: PPP session is 6
Fri Nov  6 22:33:29 2015 daemon.warn pppd[6379]: Connected to xx:xx:xx:xx:xx:xx via interface eth0.2
Fri Nov  6 22:33:29 2015 kern.info kernel: [  120.100000] pppoe-wan: renamed from ppp0
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: Using interface pppoe-wan
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: Connect: pppoe-wan <==>eth0.                                                                          2
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: CHAP authentication succeeded: CHAP authentication success
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: CHAP authentication succeeded
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: peer from calling number 00:5                                                                          0:7F:F4:62:78 authorized
Fri Nov  6 22:33:29 2015 daemon.err pppd[6379]: IPv6 socket creation failed: Address family not supported by protocol
Fri Nov  6 22:33:29 2015 daemon.err pppd[6379]: IPv6 socket creation failed: Address family not supported by protocol
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: local  IP address xxx.xxx.xxx.xxx
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: remote IP address 2.127.238.113
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: primary   DNS address xxx.xxx.xxx.xxx
Fri Nov  6 22:33:29 2015 daemon.notice pppd[6379]: secondary DNS address xxx.xxx.xxx.xxx
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: LCP terminated by peer
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: Connect time 0.0 minutes.
Fri Nov  6 22:33:29 2015 daemon.info pppd[6379]: Sent 0 bytes, received 38 bytes    

And here is the log from OpenWRT

Code: Select all

Wed Sep  9 04:08:04 2015 daemon.info pppd[1063]: PPP session is 6
Wed Sep  9 04:08:04 2015 daemon.warn pppd[1063]: Connected to 00:50:7f:f4:62:78via interface eth0.2
Wed Sep  9 04:08:04 2015 kern.info kernel: [   21.320000] pppoe-wan: renamed from ppp0
Wed Sep  9 04:08:04 2015 daemon.info pppd[1063]: Using interface pppoe-wan
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: Connect: pppoe-wan <--> eth0.2
Wed Sep  9 04:08:04 2015 daemon.info pppd[1063]: CHAP authentication succeeded:CHAP authentication success
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: CHAP authentication succeeded
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: peer from calling number xx:xx:xx:xx:xx:xxauthorized
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: local  LL address xxxx::xxxx:xxxx:xxxx:xxxx
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: remote LL address xxxx::xxxx:xxxx:xxxx:xxxx
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: local  IP address xxx.xxx.xxx.xxx
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: remote IP address xxx.xxxx.xxx.xxx
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: primary   DNS address xxx.xxx.xxx.xxx
Wed Sep  9 04:08:04 2015 daemon.notice pppd[1063]: secondary DNS address xxx.xxx.xxx.xxx
Wed Sep  9 04:08:04 2015 daemon.notice netifd: Network device 'pppoe-wan' link is up
Wed Sep  9 04:08:04 2015 daemon.notice netifd: Interface 'wan' is now up

The only problems I can see are that Gargoyle is trying to establish an ipv6 connection and fails due to a pppd family un supported protocol.

Further suggestions appreciated.

[Lantis]

Can you please set the following variables in
/etc/ppp/options

lcp-echo-interval 60
lcp-echo-failure 5

(Defaults are 5 and 1)
And then reboot and try again?

[Lantis]

Also in that same file you can set an option to do more detailed logging. Might be helpful also. Just send it somewhere like /tmp/pppoedebug.