Can't access gui behind switch *SOLVED!*

[Tank_Killer]

Hello, I have gargoyle 1.5 on my WNDR3700v1. Here is my topography.

modem-->WNDR3700-->8port layer 2 switch (Cisco SLM2008)-->clients

I cannot get to the router login page from anything behind the switch, is there something i'm missing? I am using standard frame size of 1500 ect. Also I have changed my gatway and DHCP pool ect to run on 192.168.0.1, I have 3 other devices with static ips and I can login to those fine. My static IP clients are assigned addresses BELOW the DHCP pool range.

I can get to the gargoyle login page if I am on wireless, or connected directly to the WNDR3700.

[hnl_dk]

I would more guess that it could be a VLAN problem in your switch.

[Tank_Killer]

Well my switch has the default vlan in place, of which all ports are a member of. I dont need multiple vlans and did not configure any. everything behind the switch works great EXCEPT i cannot access the gargoyle login page.

[hnl_dk]

Well my switch has the default vlan in place, of which all ports are a member of. I dont need multiple vlans and did not configure any. everything behind the switch works great EXCEPT i cannot access the gargoyle login page.

are you able to access anything else on the main network?

[Tank_Killer]

I have a NAS and a wired network printer behind the siwtch (same side the client PC is on), and I can get to them fine. I have no other devices on the routers switch, its just one cable to cascade my router to my main switch.

I should also mention I could access the router GUI fine on the netgear stock firmware, in the exact same setup. Only thing that changed is now the WNDR3700 is gargoyle.

[Tank_Killer]

I'm not sure whats going on, but if I try the gui using HTTPS its works for the most part. But some pages/graphics randomly wont display, and the logout screen doesnt ever work.

Anyone?

[hnl_dk]

I'm not sure whats going on, but if I try the gui using HTTPS its works for the most part. But some pages/graphics randomly wont display, and the logout screen doesnt ever work.

Anyone?

What antivirus program do you have?
Someone else had a similar problem with NOD (I think it was called NOD).

[Tank_Killer]

BINGO!! It was my NOD antivirus, good call. I resolved the issue by adding the IP of the gateway to the excluded ip list in this manner.

Advanced setup-->Web and Email-->Protocol filtering-->Excluded IP addresses

Hope this doesnt prevent antivirus filtering from the internet now

[hnl_dk]

BINGO!! It was my NOD antivirus, good call. I resolved the issue by adding the IP of the gateway to the excluded ip list in this manner.

Advanced setup-->Web and Email-->Protocol filtering-->Excluded IP addresses

Hope this doesnt prevent antivirus filtering from the internet now

let hope so... but a funny thing, none of the antivirus programs I am using is going me problems with Gargoyle.

[hnl_dk]

Looks like Gargoyle is not the only one with NOD32 problems...
http://kb.eset-la.com/esetkb/index?page ... d=SOLN2890