Just wondering if there is a firmware for the v3.12.4 variant of the TP-LINK WR741ND. I see from the download page that there is one for the v1 version but I'm not sure if that will be safe to use for the v3 firmware.
Any ideas?
WR741ND V3.12.4
Moderator: Moderators
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: WR741ND V3.12.4
http://wiki.openwrt.org/es/toh/tp-link/tl-wr741nd
Does not show OpenWRT support yet.
That does NOT mean it won't work - but there is a very good possiblity
that if you try and flash OpenWRT / Gargoyle on that V3, you
will have to recover via Serial Console.
If you don't want to mess with Serial - do NOT flash OpenWRT/Gargoyle
onto your router yet - have to wait.
Does not show OpenWRT support yet.
That does NOT mean it won't work - but there is a very good possiblity
that if you try and flash OpenWRT / Gargoyle on that V3, you
will have to recover via Serial Console.
If you don't want to mess with Serial - do NOT flash OpenWRT/Gargoyle
onto your router yet - have to wait.
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
ArticFrozen
- Posts: 2
- Joined: Sun Oct 09, 2011 7:06 am
Re: WR741ND V3.12.4
Thanks for the reply!
Guess I'll have to wait then. Wouldn't want to break my router unnecessarily.
Guess I'll have to wait then. Wouldn't want to break my router unnecessarily.