I'm having a strange issue on WRT54GL router, I am on version 1.3.15 and trying to update to the latest one (1.4.2) but after the uploading screen nothing happens and the router only seems to reboot to the same version.
Any suggestions?
Also for development, I think it would be nice to add links to this main site and the forum to the firmware. what do you think?
Can't upgrade
Moderator: Moderators
Can't upgrade
Linksys WRT54GL = Gargoyle 1.4.2
TP-Link TL-WR741ND = Gargoyle 1.4.2
Buffalo WZR-HP-G300NH = Gargoyle 1.4.2
http://eduboris.blogspot.com/search/label/Gargoyle
TP-Link TL-WR741ND = Gargoyle 1.4.2
Buffalo WZR-HP-G300NH = Gargoyle 1.4.2
http://eduboris.blogspot.com/search/label/Gargoyle
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Can't upgrade
Have you tried to TFTP the new build to the router?
TFTP should always work - sometimes flashing via the GUI
has issues and fails or occasionally the config gets corrupted and
you have to recover via TFTP anyway.
Try a TFTP flash and see if you can get 1.4.2 on.
TFTP should always work - sometimes flashing via the GUI
has issues and fails or occasionally the config gets corrupted and
you have to recover via TFTP anyway.
Try a TFTP flash and see if you can get 1.4.2 on.


2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Can't upgrade
it's true I should try but read the other post by mix and the command lines via ssh worked although it took at least 5 minutes or something... thanks for all the help! 

Linksys WRT54GL = Gargoyle 1.4.2
TP-Link TL-WR741ND = Gargoyle 1.4.2
Buffalo WZR-HP-G300NH = Gargoyle 1.4.2
http://eduboris.blogspot.com/search/label/Gargoyle
TP-Link TL-WR741ND = Gargoyle 1.4.2
Buffalo WZR-HP-G300NH = Gargoyle 1.4.2
http://eduboris.blogspot.com/search/label/Gargoyle