Recommend a good dual-band N router that can run Gargoyle
Moderator: Moderators
Recommend a good dual-band N router that can run Gargoyle
I'm currently running Gargoyle 1.2.5 on an old WRT54GL. I'm considering getting a newer router with more RAM, Gigabit Ethernet and dual-band 802.11n wifi. Does anyone have one in particular that they own that works really well and runs Gargoyle?
-
DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Recommend a good dual-band N router that can run Gargoyl
http://www.gargoyle-router.com/phpbb/vi ... f=8&t=1727
Looks like people are having success with the Netgear WNDR3700
running the latest Gargoyle firmware.
Looks like people are having success with the Netgear WNDR3700
running the latest Gargoyle firmware.
Soylent Green Is People! 2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Recommend a good dual-band N router that can run Gargoyl
Like DoesItMatter already pointed out; the Netgear WNDR3700v2 that I have purchased a little over a month ago, runs very well with Gargoyle version 1.4.2 (previously also on 1.4.0). Much, much better than with the original firmware. Great combination, IMO.jdmulloy wrote:I'm currently running Gargoyle 1.2.5 on an old WRT54GL. I'm considering getting a newer router with more RAM, Gigabit Ethernet and dual-band 802.11n wifi. Does anyone have one in particular that they own that works really well and runs Gargoyle?
Urgje (Netgear WNDR3700v2 / Gargoyle 1.4.7)
[my ego shrank while growing up]
[my ego shrank while growing up]