40MHZ ?

[dsalch]

I have an older TP-LINK Archer C7 v5 running gargoyle 1.12.0

I'd like to get a wifi connection running across 40mhs on 2.4G. This connection is to a ubiquiti bullet M2.

IT seems as though the router seems to refuse to go into 40MHZ mode. It runs perfectly fine in 20MHz. I have eliminated noise on adjacent channels (for hte most part) and tries 1, 6, and 11

GUI Entries:

Wireless Mode:
Access Point (AP)
2.4GHz Operation Mode:
B+G+N
2.4GHz Channel Width:
40MHz 2nd chan. below
2.4GHz Transmit Power:
Max

24
(0 - 24dBm)
5GHz Operation Mode:
A+N+AC
5GHz Channel Width:
80MHz
5GHz Transmit Power:
Max

30
(0 - 30dBm)
Wireless MAC Filter:
Disabled
AP 2.4GHz SSID:
SALCHHOME

AP 5GHz SSID:
SALCHHOME-5G
Wireless Channel (2.4GHz):
11
Wireless Channel (5GHz):
149
Encryption:
None
Broadcast SSID:
Enabled
Wireless Client Isolation:
Disabled

[Lantis]

I have eliminated noise on adjacent channels (for hte most part) and tries 1, 6, and 11

viewtopic.php?p=36846&hilit=Noscan#p36846

You can manually add this option to your configuration to test.
Whether you choose to keep it in the configuration is up to you.