Gargoyle 1.15.x BETA - 2025-03-31 - Based on OpenWrt 23.05

[fifonik]

The missing instruction in that post is that you need to restart uhttpd (or the entire router).

Ah! It works after router restart! Ta

P.S. I remembered the other issue I have with the FW that I reported in the thread. UPDATE: just checked it out and the issue still there. I have not expected any miracles, to be honest.

[jarek7714]

However, I will provide a test image and the build config such that you can build your own if you would like to. Give me some time to come back on this.

Okay. Thanks

[Lantis]

However, I will provide a test image and the build config such that you can build your own if you would like to. Give me some time to come back on this.

Okay. Thanks

Give this a try
https://lantisproject.com/downloads/gar ... JwbCI6MTB9

If it works and you are willing to learn to compile it yourself, there are good instructions on GitHub and this forum.
Happy to work through getting that working successfully for you in another forum thread if you wish.

Either way, let me know if it’s successful.

[jarek7714]

Give this a try
https://lantisproject.com/downloads/gar ... JwbCI6MTB9

If it works and you are willing to learn to compile it yourself, there are good instructions on GitHub and this forum.
Happy to work through getting that working successfully for you in another forum thread if you wish.

Either way, let me know if it’s successful.

Code: Select all

 
Device

    Device Name:Gargoyle
    Gargoyle Version:1.15.X (Built 20250428-0204 git@e69325f5)
    Model:Google WiFi (Gale)
    Device Configuration:Gateway
    Memory Usage:61.5MB / 484.5MB (12.7%)
    Connections:41/4096
    CPU Load Averages:0.00 / 0.02 / 0.04 (1/5/15 minutes)

WAN

    WAN Port Speed:1Gbps
    WAN IP Address:192.168.44.126
    WAN Netmask:255.255.255.0
    WAN MAC Address:E4:F
    WAN Gateway IP:192.168.44.1
    -
    WAN DNS Server(s):192.168.44.1

LAN

    LAN IP Address:192.168.20.1
    fd26:94cf
    LAN Netmask:255.255.255.0
    fd26:94cf:1fa9::1/60
    LAN MAC Address:E4:F0:42

Port	Status
LAN	1Gbps
Wireless

    Wireless Mode: Disabled

I installed the image/it works. Now you can finally use the potential of this small router, but with 512MB RAM and 4GB FLASH at your disposal. Many thanks.

[ektus]

Trying to upgrade my MT6000, I get the following warning:

Code: Select all

Valid firmware:
No
Firmware matches device:
No
Supported devices:
Firmware/Device Compatibile:
Yes
Firmware fits in flash memory:
-
Checksum matches:
-

    MD5: d41d8cd98f00b204e9800998ecf8427e
    SHA-1: da39a3ee5e6b4b0d3255bfef95601890afd80709
    SHA-256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855

The router is currently running

Code: Select all

Gerätename:Flint2-Gargoyle
Gargoyle Version:1.15.X (Built 20241113-0953 git@b0c923bf)
Model:GL.iNet GL-MT6000

Is it safe to force update, or is there something seriously wrong? There's also a checksum mismatch (should be 3b2b439eea0a78fa7c31139e9f33014ecbdeec08e98128270fca9402adfae9cb according to https://lantisproject.com/storage/gargo ... sha256sums), and if I check the file on my computer, the checksum matches. Is there a checksum computing error on the router?
If I ssh into the router, the file /tmp/up/upgrade shows as 0 bytes size. File system trouble?

Code: Select all

root@Flint2-Gargoyle:/tmp# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/root                11776     11776         0 100% /rom
tmpfs                   506384    506384         0 100% /tmp
/dev/loop0             7575744    199352   7376392   3% /overlay
overlayfs:/overlay     7575744    199352   7376392   3% /
tmpfs                      512         0       512   0% /dev

Yes, there is.

Code: Select all

-rw-rw----    1 dnsmasq  root     517767168 May 18 15:11 dnsmasq.log

Delete the log file and retry... success

Code: Select all

    Device Name:Flint2-Gargoyle
    Gargoyle Version:1.15.X (Built 20250330-2253 git@ca9ca6a5)
    Model:GL.iNet GL-MT6000
    Device Configuration:Gateway
    Memory Usage:128.9MB / 989MB (13%)
    Swap Memory Usage:0MB / 19077MB (0%)
    Connections:656/4096
    CPU Load Averages:0.68 / 0.30 / 0.11 (1/5/15 minutes)
    CPU Temperature:49 °C
    RAM Temperature:- °C
    Wifi Temperature:- °C

[Lantis]

Have you modified dnsmasq at all? In its default configuration it should not be filling /tmp.

[ektus]

I've had problems with

Code: Select all

possible DNS-rebind attack detected: alb00000069.dpool.sina.com.cn

and had been trying to identify the local device(s) that's causing them. Probably I've failed to disable logging again
The file contains mostly those messages, approx one every second since March 6th.
The log was useless for identifying purposes as it doesn't report the device that's issued the request.

[Lantis]

There is a ubus interface for listening to all DNS requests, but I think it only logs those that are forwarded. These are blocked before that so might be another dead end.