DNS

[AX90]

Hello,

I have currently "Default Servers specified by ISP" set for DNS.

However, if I use Auto DNS mode in iPhone or IPad then I do not get connected to Internet. I must always manually enter the DNS "192.168.1.1". Then it works.

I get Internet from Cable Company and in my Router I have the setting for "Connected via" set for "DHCP (wired)".

Any idea what might be wrong?

[Lantis]

Is it possible you have more than 1 DNS server running on your network causing the iphones to misconfigure?
What DNS are they detecting when they are in automatic mode?

Have you made any other changes? Anything non-standard on the command line?
Is force router DNS set on or off, and does it make a difference when changed?

[AX90]

I do not have any DNS in my Home network. I use static IPs and I wanted to use only DNS from Internet provider.

I did not make any changes on the command line level.

"Force Router DNS" is not set. I will try to set it and see what happens.

What is interesting that I have many HP Elitebooks and they work without any problem. Here I use DHCP for IP and DNS is auto set. Only in case of the iPhones I am using static IPs that I manually enter and the DNS only what I wanted to set as Auto.

[Lantis]

Why are you manually entering static IPs on the iPhone itself? Control this from the router.

[Lantis]

It looks like iOS may require DNS to be set manually when using manual IP address.