Hallo,
i have the following Question to my Gargoyle Router config:
Is it possible to set the DHCP server in Gargoyle so that it only assigns static IP addresses ?
I have to activate the DHCP server in the DHCP mask so that it assigns stored static IP addresses.
But that only works if I also enter a DHCP lease
(minimum 1 IP -Adress: e.g. from .120, to .120)
But I don't want to assign IP addresses from a lease, only the registered static IP addresses
How can I ensure that the DHCP server only assigns static IP addresses based on stored MAC addresses
thanks in advance
PID
only DHCP Static IP Adress
Moderator: Moderators
Re: only DHCP Static IP Adress
It looks like setting the dynamicdhcp flag to 0 would do this
https://openwrt.org/docs/guide-user/bas ... dhcp_pools
uci set dhcp.lan.dynamicdhcp=0
uci commit dhcp
Then trigger a reboot of the router.
This hasn’t been tested, your mileage may vary.
https://openwrt.org/docs/guide-user/bas ... dhcp_pools
uci set dhcp.lan.dynamicdhcp=0
uci commit dhcp
Then trigger a reboot of the router.
This hasn’t been tested, your mileage may vary.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.