Experimental Gargoyle 1.15.x (released as 1.14) beta 20230124

[ispyisail]

I want to upgrade my production routers but the upgrade path is so painful

[Lantis]

@Lantis any chance you could add the Belkin F9K1115v2 to the ath79 builds? It's supported in OpenWRT. Thanks!

Building a test image overnight, will upload for you and if it tests fine happy to include it.

[Lantis]

@Lantis any chance you could add the Belkin F9K1115v2 to the ath79 builds? It's supported in OpenWRT. Thanks!

Building a test image overnight, will upload for you and if it tests fine happy to include it.

It is now available:
Factory
Sysupgrade

[rg66]

First of all, many thanks for Gargoyle and all your hard work.

TL-MR3420 v5 with gargoyle_1.15.x-ramips-mt76x8-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin from Feb 19/23.

Haven't tested it in my network yet but 2 small issues so far.
1- No lights for wireless or LAN, only power.
2- Saving changes doesn't refresh page in some settings, just get "Please Wait While Settings Are Applied" spinner and have to refresh manually.

[ispyisail]

Haven't tested it in my network yet but 2 small issues so far.
1- No lights for wireless or LAN, only power.
2- Saving changes doesn't refresh page in some settings, just get "Please Wait While Settings Are Applied" spinner and have to refresh manually.

Are these problems unique to 1.15. x with your router?

I wonder if these problems have been there forever?

"Please Wait While Settings Are Applied"

From my understanding this has been a problem for a long time, I just wait a long time then refresh my browser.

[Lantis]

First of all, many thanks for Gargoyle and all your hard work.

TL-MR3420 v5 with gargoyle_1.15.x-ramips-mt76x8-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin from Feb 19/23.

Haven't tested it in my network yet but 2 small issues so far.
1- No lights for wireless or LAN, only power.

Can you please run
gpkg list-installed | grep leds
And confirm if kmod-leds-gpio is installed?
If it isn’t, try installing it from my server and reboot to check again.

[rg66]

Thanks for your response.

I've also tried 1.13.x from aimacintyre (github) and 1.12.0.2 from dl.eko.one.pl and have none of these issues with either firmware.

The refresh issue only seems to affect Connection > Basic > Wan/Wireless settings and changing DNS servers.

I'm playing around with 1.12.0.2 right now but will re-flash 1.15.x later today or tomorrow and run gpkg and try and install the LED package if needed.

I will let you know asap, thanks

[rg66]

It looks like it isn't installed

Code: Select all

root@Gargoyle:~# gpkg list-installed | grep leds
root@Gargoyle:~#

Trying to install it gives me this error.

Code: Select all

root@Gargoyle:~# gpkg install kmod-leds-gpio
ERROR: Dependency kernel (= 5.10.166-1-96bbee78dc257b8273b74d6c74003dfa) of package kmod-leds-gpio is installed,
but has incompatible version 5.10.166-1-9caa2dc205ae60d63831805d3194af38

[ispyisail]

Did you change the repo?

You can install the gargoyle-plugin-upnp to enable the feature. It has been removed by default due to space constraints.
Add the following as custom plugin repositories (for your device)

Code: Select all

https://lantisproject.com/gargoyle_custom/1.15.x_2203_test_builds/ath79/default
https://lantisproject.com/gargoyle_custom/1.15.x_2203_test_builds/ath79/default_kernelspecific

[Lantis]

Did you change the repo?

You can install the gargoyle-plugin-upnp to enable the feature. It has been removed by default due to space constraints.
Add the following as custom plugin repositories (for your device)

Code: Select all

https://lantisproject.com/gargoyle_custom/1.15.x_2203_test_builds/ath79/default
https://lantisproject.com/gargoyle_custom/1.15.x_2203_test_builds/ath79/default_kernelspecific

This, but the ramips/mt76x8 one for your device
I’m reasonably confident all of the LEDs will start working