wrt33x

Report problems and success stories with Gargoyle on various hardware platforms.

Moderator: Moderators

Post Reply
Constantine
Posts: 1
Joined: Fri Sep 23, 2022 2:53 am

wrt33x

Post by Constantine »

Hello everyone,

I’m using gargoyle for years I have installed it almost in every router I had ither via serial (wrt1900) or from gui.
I just bought a wrt32x (second hand) in which the previous owner had flashed ddwrt unfortunately in both partitions, I’m trying to install “gargoyle_1.12.0-mvebu-cortexa9-linksys-wrt32x-squashfs-sysupgrade.bin” from gui the process starts and after 10 sec the rooter reboots back to ddwrt.
I tried to connect via serial and ftp the image, but it wasn’t opening an ftp
Any ideas? because I really don’t like ddwrt (which is very good but I like gargoyle more)
Thank you

Lantis
Moderator
Posts: 6439
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: wrt33x

Post by Lantis »

You need to return to factory firmware, and then flash gargoyle using the factory image.
You cannot sysupgrade from ddwrt to Gargoyle directly.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Post Reply