Hi all,
Is there a way to use a router with wireless capabilities to do the following:
* Connect to a wireless internet in range
* Provide internet to wired connections through the wireless internet it connects to
* I'd like to be able to assign static IPv4 addresses to the devices that connect to the router via wired connections
Please note, this is different from using a router as a range extender as the source of the internet connection is wireless and the user terminals are wired
Using wireless internet as source and providing wired internet connectivity in router
Moderator: Moderators
-
- Posts: 1
- Joined: Thu Sep 17, 2020 12:33 pm
Re: Using wireless internet as source and providing wired internet connectivity in router
Yes, this mode is supported by Gargoyle.
Set the Gargoyle router as the Gateway and set the WAN as the WiFi client.
https://www.gargoyle-router.com/wiki/do ... nt_ap_mode
Set the Gargoyle router as the Gateway and set the WAN as the WiFi client.
https://www.gargoyle-router.com/wiki/do ... nt_ap_mode
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users