How to download from 1.12 to 1.10 mynet n600 or go back to factory firmware?
Moderator: Moderators
How to download from 1.12 to 1.10 mynet n600 or go back to factory firmware?
Hi, How to download from 1.12 to 1.10 mynet n600 or go back to factory firmware? I have been having problems with version 1.12 disconnecting or not browsing could you help me please, thanks.
Re: How to download from 1.12 to 1.10 mynet n600 or go back to factory firmware?
Try first with OEM firmware: https://www.techspot.com/drivers/downlo ... d02&file=1 and then by default on Gargoyle v1.10 factory image
or
try the procedures from the OpenWrt site: https://openwrt.org/toh/wd/n600
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: How to download from 1.12 to 1.10 mynet n600 or go back to factory firmware?
Method 1 on that OpenWRT page works great.
I've also had 2.4GHz WiFI issues with this N600 and N750 router model... oddly turning off N and keeping it at slow G/N makes it more reliable.
I've also had 2.4GHz WiFI issues with this N600 and N750 router model... oddly turning off N and keeping it at slow G/N makes it more reliable.
QoS Tip: Don't complicate your QoS settings. Gargoyle evenly splits available bandwidth between active devices as needed. Just delete all your classification rules and leave only one normal service class and you're done. No more arguing over bandwidth.
-
Grumpy_feet
- Posts: 6
- Joined: Fri Dec 13, 2019 6:22 am
Re: How to download from 1.12 to 1.10 mynet n600 or go back to factory firmware?
I've been using mynet n600 for almost two years now with very few issues. The only time I encounter issues was my own doing, tinkering with it a lot.