Openwrt 19.07 based Gargoyle

[papka__]

It isn't needed explicitly in the config anymore with the latest patch, it is set as a default in the hostapd config generation script.

OK. Thought option still should be set. Thank you for explanation.

[doug_porsche]

NETGEAR WNDR3700v4 and adblock loaded
Now testing
Thanks

[papka__]

WDS. Any chance to get it working on WPA3? For now, whenever WAP2/WPA3 choosen, WDS connection using WPA2.

[Lantis]

In AP mode? Or as a client bridge? I haven't tested that, but i can look.

[papka__]

In AP mode? Or as a client bridge? I haven't tested that, but i can look.

Main router is AP+WDS, then slave as bridge/repeater connected via WDS.

[Lantis]

I've added code to select the highest protocol in a situation where the upstream network is "mixed"

[papka__]

Thank you. Will test in next build and will let you know if it's working.

[papka__]

Is it only for me Bandwidth monitoring not working at all?
Found this only on latest (RC2 based) builds. Maybe problem was already before. B/W Distribution also empty... Any ideas?

[papka__]

I think small fix should be done in ramips.mt7621.config

Code: Select all

# CONFIG_PACKAGE_kmod-usb3 is not set

should be changed to

Code: Select all

CONFIG_PACKAGE_kmod-usb3=y

Otherwise USB port not working. Checked this on mir3g.

[RomanHK]

I think small fix should be done in ramips.mt7621.config

Code: Select all

# CONFIG_PACKAGE_kmod-usb3 is not set

should be changed to

Code: Select all

CONFIG_PACKAGE_kmod-usb3=y

Otherwise USB port not working. Checked this on mir3g.

So I have already asked in the Czech Republic at the manufacturer and I was told that it is absolutely unnecessary, because the 4.14 kernel already has support for USB3 in itself. (Using the kmod-usb-core and kmod-usb2 kernel modules):

You don’t need to have it at all as it is enabled in the kernel. You may check it from usb.mk and as well in kernel config for 4.14