I was looking at the download screen and have no idea which file I need to get. How do I go about flashing this router with Gargoyle?
What's the last version that Gargoyle still support with tiny build?
How to flash dir 601 A1 with Gargoyle?
Moderator: Moderators
Re: How to flash dir 601 A1 with Gargoyle?
viewtopic.php?f=8&t=6989&p=28648#p28648
You can try it from a Polish colleague:
If you have D-Link firmware: http://dl.eko.one.pl/gargoyle-pl/attitu ... actory.bin
If you already have Gargoyle or OpenWrt: http://dl.eko.one.pl/gargoyle-pl/attitu ... pgrade.bin
It's at your own risk.
P.S. 4MB Flash? we can classify this as a museum piece ...
You can try it from a Polish colleague:
If you have D-Link firmware: http://dl.eko.one.pl/gargoyle-pl/attitu ... actory.bin
If you already have Gargoyle or OpenWrt: http://dl.eko.one.pl/gargoyle-pl/attitu ... pgrade.bin
It's at your own risk.
P.S. 4MB Flash? we can classify this as a museum piece ...
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: How to flash dir 601 A1 with Gargoyle?
If you want the latest firmware that supports all features it was 1.5.11. The Polish build above has some features missing, like uPnP and wireless modes other than regular router. Otherwise good, though.CaptainPlanet wrote:I was looking at the download screen and have no idea which file I need to get. How do I go about flashing this router with Gargoyle?
What's the last version that Gargoyle still support with tiny build?
Links below, for some reason they're not listed in the download section even though they're still hosted. This router has less than 4Mb because it has emergency recovery.
https://www.gargoyle-router.com/downloa ... pgrade.bin
https://www.gargoyle-router.com/downloa ... actory.bin
I still have one running as a bridge after all these years. Rock solid.
QoS Tip: Don't complicate your QoS settings. Gargoyle evenly splits available bandwidth between active devices as needed. Just delete all your classification rules and leave only one normal service class and you're done. No more arguing over bandwidth.
-
CaptainPlanet
- Posts: 6
- Joined: Thu Dec 12, 2019 3:46 pm
Re: How to flash dir 601 A1 with Gargoyle?
I tried the guide method using the recovery menu and none of the browsers could even upload the file. It just spins infinitely and never actually upload anything.
IT'S 2019! It's not like I could just get my hands on a Windows XP machine and use Internet Explorer 6.
Eventually someone mentioned they were able to flash Openwrt using the normal web interface.
https://forum.archive.openwrt.org/viewt ... p?id=44107
The last stable openwrt firmware for dir 601 was 17.1.1 from 2017 while the gargoyle was 1.5.11 from 2014, and 1.6.22 from 2016. Although I would like to enjoy a user-friendly interface like Gargoyle, the slightly more recent security patches will be better in the long run, so I went with that.
other references
viewtopic.php?f=5&t=1012
https://oldwiki.archive.openwrt.org/toh ... first.time
IT'S 2019! It's not like I could just get my hands on a Windows XP machine and use Internet Explorer 6.
Eventually someone mentioned they were able to flash Openwrt using the normal web interface.
https://forum.archive.openwrt.org/viewt ... p?id=44107
The last stable openwrt firmware for dir 601 was 17.1.1 from 2017 while the gargoyle was 1.5.11 from 2014, and 1.6.22 from 2016. Although I would like to enjoy a user-friendly interface like Gargoyle, the slightly more recent security patches will be better in the long run, so I went with that.
other references
viewtopic.php?f=5&t=1012
https://oldwiki.archive.openwrt.org/toh ... first.time