I recall reading an OpenWrt thread (which I now can't find ) in which reference was made to an issue specific to the EA8500 with resetting the switch during reboot as a result of a patch - commit of said patch had been reversed early in the 18.06 branch but not in master and the 19.07 branch until sometime in the last few weeks. I suspect the reversal was after 19.07-rc1 (which I understand would have been the base of the Lantis 1.13.x build you're now running) but before 19.07-rc2; if so this should be corrected when Lantis next updates his build.Maniac wrote:Anyway, Lantis, your 1.13.X build is working fine after applying the CPU tweak. The only issue I'm having is that when I reboot the router, it can't see the
cable modem anymore. If I type "192.168.100.1" into the browser it can't find the modem and it's unable to get an IP address until I reboot the modem.
Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
Moderator: Moderators
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
@Lantis: This is in DHCP (wired) mode @Lantis.
I noticed the 5 GHz wireless is not working on the 1.13.x build. 2.4 GHz wireless works. 5 GHz DID work on pythonic's 1.11.x build. (I didn't notice until now because I have multiple 5GHz APs).
@pythonic I never tried 1.11.0 with this specific router, but it works on my old WNDRMACv2.
I will try an OpenWrt Build.
And thanks for the info about the switch!
I noticed the 5 GHz wireless is not working on the 1.13.x build. 2.4 GHz wireless works. 5 GHz DID work on pythonic's 1.11.x build. (I didn't notice until now because I have multiple 5GHz APs).
@pythonic I never tried 1.11.0 with this specific router, but it works on my old WNDRMACv2.
I will try an OpenWrt Build.
And thanks for the info about the switch!
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
Just an observation that 1.13.x should be using the ct radio driver and firmware, rather than the original ath10k driver/firmware used in 1.11.x/1.12. In principle this should be transparent, but maybe there are some problems still. If you tried the 160MHz bandwidth option (if that is showing), you might want to try 80MHz instead. I'm not sure whether the 160MHz support is there in the 19.07-rc1 base for that 1.13.x build.Maniac wrote:I noticed the 5 GHz wireless is not working on the 1.13.x build. 2.4 GHz wireless works. 5 GHz DID work on pythonic's 1.11.x build. (I didn't notice until now because I have multiple 5GHz APs).
If you want to try my 1.11.0 build for the EA8500 to see whether that has the problem as well, send me a PM listing the files you need and I'll find a way of getting them to you (I still have the build package but had to remove it from my website for space reasons).Maniac wrote:@pythonic I never tried 1.11.0 with this specific router, but it works on my old WNDRMACv2.
I will try an OpenWrt Build.
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
Ohh! I figured out more about the wireless issue. On the 1.11.X build, I was using channel 100 (a DFS channel) which worked just fine. On the 1.13.X build, the *only* channel that transmits seems to be 36. If I choose 52 (DFS), 100 (DFS), or even 149 (a normal channel), nothing transmits.
I am using 80MHz, 160 does not show up.
I am using 80MHz, 160 does not show up.
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
Are you waiting for the CAC to complete? It won't transmit immediately.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
My router had been up for a while, it never transmitted. Also, note, it doesn't transmit on channel 149 either - which is not a DFS channel.
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
Would need a logread to understand if there's anything wrong
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
I can try to get that for you if you tell me where to look.
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
The easiest way is to connect to the command line for the router, then issue a "wifi" command (to reload the wifi).
Count to 60, then issue a "logread" command.
Copy and paste everything that comes back to me and we'll take a look.
Obviously as this reloads the wifi, best to do this over LAN
Count to 60, then issue a "logread" command.
Copy and paste everything that comes back to me and we'll take a look.
Obviously as this reloads the wifi, best to do this over LAN
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Experimental build of Gargoyle 1.12.0 for ipq806x architecture routers
I sent you a PM, thanks!