Fast CPU Gargoyle supported
Moderator: Moderators
Fast CPU Gargoyle supported
Hi all.
Time to hand over my Archer C7 to some (already found someone) and get a router that can better support our 150M connection with all the Gargoyle functions enabled.
I read on the forum to expect CPU speed / 15 to match the max throughput with Gargoyle. That rule of thumb works with my Archer C7 (720MHz / 15 = 48, darn close to where it tops out).
So ideallyy I need a 2.2 Ghz CPU get the max out of my connection. Best I can find with 1.4 or 1.8Ghz dual core CPUs are:
- TP-Link Archer C2300 - 1.8Ghz
- LINKSYS WRT3200ACM - 1.8Ghz
- LINKSYS WRT32X - 1.8Ghz
- LINKSYS EA7500-CA - 1.4Ghz
- LINKSYS WRT1900AC- 1.3Ghz
Any of the above (or others) know to work better with Gargoyle? Right now, my C7 is strictly an AP, and my DIR-890 handles the wireless (stock firmware sucks but the range is exceptional).
Thanks
Time to hand over my Archer C7 to some (already found someone) and get a router that can better support our 150M connection with all the Gargoyle functions enabled.
I read on the forum to expect CPU speed / 15 to match the max throughput with Gargoyle. That rule of thumb works with my Archer C7 (720MHz / 15 = 48, darn close to where it tops out).
So ideallyy I need a 2.2 Ghz CPU get the max out of my connection. Best I can find with 1.4 or 1.8Ghz dual core CPUs are:
- TP-Link Archer C2300 - 1.8Ghz
- LINKSYS WRT3200ACM - 1.8Ghz
- LINKSYS WRT32X - 1.8Ghz
- LINKSYS EA7500-CA - 1.4Ghz
- LINKSYS WRT1900AC- 1.3Ghz
Any of the above (or others) know to work better with Gargoyle? Right now, my C7 is strictly an AP, and my DIR-890 handles the wireless (stock firmware sucks but the range is exceptional).
Thanks
Linksys WRT3200ACM on 1.10.x
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
Re: Fast CPU Gargoyle supported
New WRT3200ACMs (manufacture date ~Nov 17+) don’t work with Gargoyle (yet).
WRT32X doesn’t work at all.
I’ve had the most success personally with a WRT1900AC v1
WRT32X doesn’t work at all.
I’ve had the most success personally with a WRT1900AC v1
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Fast CPU Gargoyle supported
Does the WRT1900AC V2 support Gargoyle? Afraid I'll have better luck finding a unicorn than a V1.
Any of the Asus routers support Gargoyle?
Thanks
Any of the Asus routers support Gargoyle?
Thanks
Linksys WRT3200ACM on 1.10.x
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
Re: Fast CPU Gargoyle supported
Found a WRT1900ACS in town. Do those play nice with Gargoyle?
Linksys WRT3200ACM on 1.10.x
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
Re: Fast CPU Gargoyle supported
Should be ok as long as it is well ventilated. They run warm.
I’ve never used Asus
I’ve never used Asus
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Fast CPU Gargoyle supported
Turns out the WRT3200ACM was only 20$ more than the WRT1900ACS, so went with the more powerful router. Since the WiFi won't be used short term, the faster CPU will be worth the investment.
Was happy to stumble on the following thread to copy key items from my Archer C7 to the WRT3200ACM.
viewtopic.php?f=14&t=9415&hilit=winscp+ ... s&start=20
Thanks for everyone that posts tricks on this site.
Time to kick the kids off the internet and see how this router performs.
Was happy to stumble on the following thread to copy key items from my Archer C7 to the WRT3200ACM.
viewtopic.php?f=14&t=9415&hilit=winscp+ ... s&start=20
Thanks for everyone that posts tricks on this site.
Time to kick the kids off the internet and see how this router performs.
Linksys WRT3200ACM on 1.10.x
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
Re: Fast CPU Gargoyle supported
With QoS enabled, I was lucky to get 46Mbps with the Archer C7 on 1.9.2. With the WRT3200ACM and the same settings, it can handle 134Mbps with 1.10.x. This surpasses my expectations.
Linksys WRT3200ACM on 1.10.x
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
Re: Fast CPU Gargoyle supported
b17gsr wrote:Turns out the WRT3200ACM was only 20$ more than the WRT1900ACS, so went with the more powerful router. Since the WiFi won't be used short term, the faster CPU will be worth the investment.
I believe that's one of (if not) the fastest router available nowadays. Is it? Too bad WiFi still not working as expected. Please report back with results as soon as you've done testing.Time to kick the kids off the internet and see how this router performs.
Here's a slightly updated post (added files description).Was happy to stumble on the following thread to copy key items from my Archer C7 to the WRT3200ACM.
viewtopic.php?f=14&t=9415&hilit=winscp+ ... s&start=20
I'd be careful trying to restore quotas/restrictions/portforwarding from one router model to another, since that deals directly with firewall settings and I'm not sure if it applies easily as the other files. Hope Lantis can shed a light on this one.
TP-Link Archer C7 v2 - Gargoyle 1.12.X
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
Re: Fast CPU Gargoyle supported
Turned on the WiFi, was able to connect and do some speed tests, and then the 5Ghz SSD disappeared.
I'll definitely keep using the DIR-890L as an AP.
I'll definitely keep using the DIR-890L as an AP.
Linksys WRT3200ACM on 1.10.x
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
D-Link DIR-890L/R access point with blah stock firmware
--- Retired ---
TP-LINK Archer C7 v2 on 1.9.2
Re: Fast CPU Gargoyle supported
Which channel were you using?
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.