gargoyle-ispy 2017-December-22 08:13
Moderator: Moderators
Re: gargoyle-ispy 2017-December-22 08:13
Hi!
There is something that is not clear for me.
In the 1st post it says not to install on 4MB routers. My router es TPLINK WR741ND hw. version 4.20, with 4 MB flash in theory.
But inside the .7z file and in the routers listings, I see my model listed there. In the 7z file, these two files:
gargoyle_1.10.x-ar71xx-generic-tl-wr741nd-v4-squashfs-sysupgrade
gargoyle_1.10.x-ar71xx-generic-tl-wr743nd-v1-squashfs-factory
In my TPLink WR741ND v4 I'm currently on Gargoyle 1.92.. Can I upgrade to version 1.10 using one of those files? Which one?
Thank you!!
There is something that is not clear for me.
In the 1st post it says not to install on 4MB routers. My router es TPLINK WR741ND hw. version 4.20, with 4 MB flash in theory.
But inside the .7z file and in the routers listings, I see my model listed there. In the 7z file, these two files:
gargoyle_1.10.x-ar71xx-generic-tl-wr741nd-v4-squashfs-sysupgrade
gargoyle_1.10.x-ar71xx-generic-tl-wr743nd-v1-squashfs-factory
In my TPLink WR741ND v4 I'm currently on Gargoyle 1.92.. Can I upgrade to version 1.10 using one of those files? Which one?
Thank you!!
Re: gargoyle-ispy 2017-December-22 08:13
If you want to, sure. Stability is not guaranteed. We already don’t recommend 1.9.2 so moving to 1.10.x is no better/worse for you
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: gargoyle-ispy 2017-December-22 08:13
Hey guys,
i really need your help with something.
i have Netgear WNDR4300 v1
it hasn't been functioning properly for a while specifically the congestion control. usually when that used to happen with other routers i'd clear the nvram and all would be hunky dory but, for this one here; when i boot it into recovery and attempt to access it telnet, it doesn't respond. the only thing i could do from there is DDWRT tftp tool to flash an image.
and the first boot command when i do it from ssh connection it doesn't do anything!
i am not sure if this is a common thing for nanad or what but, i really need an advice.
Thanks.
i really need your help with something.
i have Netgear WNDR4300 v1
it hasn't been functioning properly for a while specifically the congestion control. usually when that used to happen with other routers i'd clear the nvram and all would be hunky dory but, for this one here; when i boot it into recovery and attempt to access it telnet, it doesn't respond. the only thing i could do from there is DDWRT tftp tool to flash an image.
and the first boot command when i do it from ssh connection it doesn't do anything!
i am not sure if this is a common thing for nanad or what but, i really need an advice.
Thanks.
Linksys WRT1900ACS V2 1.12.x gargoyle-iSpy
Re: gargoyle-ispy 2017-December-22 08:13
Did you try a failsafe reset? Since you mentioned issuing "firstboot" through SSH, I guess so. Repeat the same process, but this time issue "firstboot -y", and see if it works.dieselz wrote:and the first boot command when i do it from ssh connection it doesn't do anything!
TP-Link Archer C7 v2 - Gargoyle 1.12.X
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
Re: gargoyle-ispy 2017-December-22 08:13
Hi all,
it looks like I've got a new problem with this build. I did update from 1.10.0 on an Archer C7 V2, preserving settings as always. This is the main router, connected to a VDSL 50 line. Surfing the net is working flawlessly, but I no longer have access to the USB storage that is attached to the router. I have a Toshiba Canvio Basics 2TB 2,5" drive connected, and "CIFS/FTP Anonymous Access: read/write" set for a share. This used to work, but now I can only view the top level directory whereas accessing any file or folder therein results in a "access denied" message. This is with Samba (CIFS) clients, both windows (XP and 7) and Android. Android asks for credentials, but neither "anonymous" nor "admin" with or without password work.
There is one message in logread that might be related:
Help? Troubleshooting advice (apart from "failsafe reset")?
Merry Christmas,
Ektus.
it looks like I've got a new problem with this build. I did update from 1.10.0 on an Archer C7 V2, preserving settings as always. This is the main router, connected to a VDSL 50 line. Surfing the net is working flawlessly, but I no longer have access to the USB storage that is attached to the router. I have a Toshiba Canvio Basics 2TB 2,5" drive connected, and "CIFS/FTP Anonymous Access: read/write" set for a share. This used to work, but now I can only view the top level directory whereas accessing any file or folder therein results in a "access denied" message. This is with Samba (CIFS) clients, both windows (XP and 7) and Android. Android asks for credentials, but neither "anonymous" nor "admin" with or without password work.
Code: Select all
df
/dev/sda1 1903500112 211532216 1595252592 12% /tmp/share_home/anonymous/PUBLIC
ls -l /tmp/share_home/anonymous/PUBLIC
drwx------ 3 admin admin 4096 Jan 2 2009 osm
-rwx------ 1 admin admin 9908517 Aug 6 2009 sew.pdf
(just two examples iut of a longer list)
ls -l /tmp/share_home/anonymous/PUBLIC/osm
drwx------ 2 admin admin 4096 Jan 17 2011 Archiv
-rwx------ 1 admin admin 21207 Apr 9 2009 FRIEDHOF_Ahornberg.GPS
(So from within webshell the subfolders are accessible)
Code: Select all
Mon Dec 25 20:13:17 2017 daemon.warn rpc.statd[4919]: Running as root. chown /var/lib/nfs to choose different user
Merry Christmas,
Ektus.
Re: gargoyle-ispy 2017-December-22 08:13
I also tried upgrading from 1.10.0 to this version via preserving settings and bad things happededpreserving settings as always
reset fixed all the problems?
Re: gargoyle-ispy 2017-December-22 08:13
Which version did it last work with?
I fixed some share issues in the last few months
I fixed some share issues in the last few months
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: gargoyle-ispy 2017-December-22 08:13
It works with 1.10.0. I just confirmed it by downgrading to that version, again preserving settings.Lantis wrote:Which version did it last work with?
I fixed some share issues in the last few months
It's a very basic share, no passwords or users apart from the default anonymous, with full access from the local network. It has been installed just a couple months ago, replacing a 10+ year old dedicated NAS.
Regards
Ektus.
Re: gargoyle-ispy 2017-December-22 08:13
Could you please point me to a document somewhere which tells the specific settings that are incompatible? I'd rather not setup from scratch.ispyisail wrote:I also tried upgrading from 1.10.0 to this version via preserving settings and bad things happededpreserving settings as always
reset fixed all the problems?
Are there any attempts at adding version information to the config files, thus enabling the router to void any incompatible settings during update while keeping the rest?
For me, any update process that involves re-configuring the device is a bad process. It costs every user time to implement, and leads to bad acceptance of updates.
Regards
Ektus.
Re: gargoyle-ispy 2017-December-22 08:13
I agree it should have workedCould you please point me to a document somewhere which tells the specific settings that are incompatible? I'd rather not setup from scratch.
I was just my experience.............
The upgrade system has never been that good. Eric never wanted to add it but people insisted...........