Version 1.9.1
Moderator: Moderators
Re: Version 1.9.1
I'm not seeing this behaviour.
My SSH is not accessible from the WAN side with the default config.
My SSH is not accessible from the WAN side with the default config.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Version 1.9.1
Same here - port 22 blocked from outside and working inside
Re: Version 1.9.1
Here's what I get with my modified dropbear config:
Then I change the dropbear config back to what I had a few days ago.
Code: Select all
# nmap -p 22 --open -sV 192.168.1.1
Starting Nmap 7.31 ( https://nmap.org ) at 2016-11-20 09:08 EST
Nmap scan report for gargoyle (192.168.1.1)
Host is up (0.0017s latency).
PORT STATE SERVICE VERSION
22/tcp open ssh Dropbear sshd 2015.67 (protocol 2.0)
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel
Code: Select all
# nmap -p 22 --open -sV notmyrealhostname.duckdns.org
Starting Nmap 7.31 ( https://nmap.org ) at 2016-11-20 09:08 EST
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 1.33 seconds
Code: Select all
/etc/config# cp dropbear.dist dropbear
/etc/config# /etc/init.d/dropbear restart
Code: Select all
# nmap -p 22 --open -sV garg.duckdns.org
Starting Nmap 7.31 ( https://nmap.org ) at 2016-11-20 09:11 EST
Nmap scan report for notmyrealhostname.duckdns.org (x.x.x.x)
Host is up (0.0019s latency).
rDNS record for x.x.x.x: x-x-x-x.hsd1.ga.comcast.net
PORT STATE SERVICE VERSION
22/tcp open ssh Dropbear sshd 2015.67 (protocol 2.0)
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel
Code: Select all
# ssh root@notmyrealhostname.duckdns.org
The authenticity of host 'notmyrealhostname.duckdns.org (x.x.x.x)' can't be established.
RSA key fingerprint is SHA256:59+5OCxagGFo+hfLwS4fdsfdsfdsfdsfdsfdsfds.
Are you sure you want to continue connecting (yes/no)? ^C
Code: Select all
# cat /etc/config/dropbear.dist
config dropbear 'global'
option PasswordAuth 'on'
option Port '22'
Code: Select all
# cat /etc/config/dropbear.lanonly
config dropbear
option PasswordAuth 'on'
option Port '22'
option Interface 'lan'
Code: Select all
Device Name:Gargoyle
Gargoyle Version:1.9.1
Model:TP-Link TL-WDR3600 v1
Device Configuration:Gateway
Re: Version 1.9.1
the default firewall should block this. An exception is placed if you enable remote ssh.
Please test a fresh installation.
Please test a fresh installation.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Version 1.9.1
TBH, I'd rather notLantis wrote:the default firewall should block this. An exception is placed if you enable remote ssh.
Please test a fresh installation.
![Smile :-)](./images/smilies/icon_e_smile.gif)
I can't say 100% for certain that I'd never enabled SSH from WAN but I can't imagine why and it would have been in error. Also, wouldn't the GUI have reflected the change?
Re: Version 1.9.1
I'm curious
When will a new stable build go out?
I have a suggestion that routers with 8mb+ that come with SQM QoS
When will a new stable build go out?
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
I have a suggestion that routers with 8mb+ that come with SQM QoS
Re: Version 1.9.1
I see some ramips routers are now supported. Just curious as to the wifi driver included in the firmware for the Xiaomi MiWiFi Mini. Is it the openwrt wifi driver?
Thanks.
Thanks.
Buffalo WZR-HP-G300NH 1.9.0
Re: Version 1.9.1
Some of them use the mt76 driver. I believe the MiWiFi Mini is included in this list.jayt wrote:I see some ramips routers are now supported. Just curious as to the wifi driver included in the firmware for the Xiaomi MiWiFi Mini. Is it the openwrt wifi driver?
Thanks.
I could not figure out what the rest use
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.
Re: Version 1.9.1
Thank you for the reply.Lantis wrote:Some of them use the mt76 driver. I believe the MiWiFi Mini is included in this list.
I could not figure out what the rest use
Do you think it would be OK to install the "Breed" bootloader and use it with Gargoyle?
Buffalo WZR-HP-G300NH 1.9.0
Re: Version 1.9.1
Wouldn't have a clue. I don't customise my bootloaders.
If it works with Openwrt, it's more than likely to work with Gargoyle.
If it works with Openwrt, it's more than likely to work with Gargoyle.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Please be respectful when posting. I do this in my free time on a volunteer basis.