I did upgrade 1.9.1 to this version on TL-WDR4300 v1, unfortunately now it reboots on it's own about 5-10 seconds after it comes up.
Any ideas what can I do?
Thank you,
dg.
Do a failsafe reset.
Instructions on google or on this forum.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
Yes I understand this. But this is not observed 1.9.1.
The main argument in favor of the 40 MHz: I live outside the city, I do not see any other Wi-Fi networks.
It is the same in 1.9.1, nothing there has changed.
Please show a logread after saving your wifi settings.
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.
I did upgrade 1.9.1 to this version on TL-WDR4300 v1, unfortunately now it reboots on it's own about 5-10 seconds after it comes up.
Any ideas what can I do?
Thank you,
dg.
Hi did you save settings? If so you will have to do a falesafe. https://wiki.openwrt.org/doc/howto/generic.failsafe
If it's old bandwidth dater then unplug your wan and login to the gargoyle and do a reset from the GUI.
Reply[1] from 192.168.1.2: bytes=10240 time=6.6 ms TTL=64
Reply[2] from 192.168.1.2: bytes=10240 time=4.8 ms TTL=64
Reply[3] from 192.168.1.2: bytes=10240 time=9.3 ms TTL=64
Reply[4] from 192.168.1.2: bytes=10240 time=131.0 ms TTL=64
Reply[5] from 192.168.1.2: bytes=10240 time=43.5 ms TTL=64
Reply[6] from 192.168.1.2: bytes=10240 time=113.6 ms TTL=64
Reply[7] from 192.168.1.2: bytes=10240 time=11.4 ms TTL=64
Reply[8] from 192.168.1.2: bytes=10240 time=5.9 ms TTL=64
Reply[9] from 192.168.1.2: bytes=10240 time=9.5 ms TTL=64
Reply[10] from 192.168.1.2: bytes=10240 time=9.9 ms TTL=64
Reply[11] from 192.168.1.2: bytes=10240 time=4.9 ms TTL=64
Reply[12] from 192.168.1.2: bytes=10240 time=10.5 ms TTL=64
Reply[13] from 192.168.1.2: bytes=10240 time=6.7 ms TTL=64
Reply[14] from 192.168.1.2: bytes=10240 time=6.3 ms TTL=64
Reply[15] from 192.168.1.2: bytes=10240 time=11.9 ms TTL=64
Reply[16] from 192.168.1.2: bytes=10240 time=46.5 ms TTL=64
Reply[17] from 192.168.1.2: bytes=10240 time=7.3 ms TTL=64
Reply[18] from 192.168.1.2: bytes=10240 time=63.1 ms TTL=64
Reply[19] from 192.168.1.2: bytes=10240 time=206.1 ms TTL=64
Reply[20] from 192.168.1.2: bytes=10240 time=29.5 ms TTL=64
Reply[21] from 192.168.1.2: bytes=10240 time=37.1 ms TTL=64
Reply[22] from 192.168.1.2: bytes=10240 time=9.5 ms TTL=64
Reply[23] from 192.168.1.2: bytes=10240 time=8.2 ms TTL=64
Lots didn't reveal anything unusual.
I'm not seeing this error on my end. Works fine at 40mhz
https://lantisproject.com/downloads/gargoylebuilds for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.