Newbie question about MR3420

[yudda]

Hi folks! I have read a very lot of 3d to find a solution to my issue but without success. I own a TPlink MR3420 v2 and I would like associate it to a USB key Huawei E372. I flashed the router with the last version of Gargoyle and it works fine. In spite of this, I cannot see the 3G connection. The USB key lamps green or blu. What can I do? Thank you very much for your help!

[Lantis]

That router does not have enough memory space to include USB support.
You might like to try an older customised version from here:
http://dl.eko.one.pl/gargoyle-pl/attitu ... nt/ar71xx/

which has been stripped back to enable enough room for usb support.
make sure to get the "en" version if you want English instead of polish.

[yudda]

Thank you very much and sorry for the late reply. Unfortunately I found another issue. Router doesn't go wireless anymore. I tried also the 30/30/30 hard reset but nothing. I'm abroad and own just a new macbook without ethernet plug...

[Lantis]

See here: viewtopic.php?f=8&t=8505

And in particular:

30/30/30 DOES NOTHING ON GARGOYLE

You're not going to be able to do much without an Ethernet port.

[yudda]

See here: viewtopic.php?f=8&t=8505

And in particular:

30/30/30 DOES NOTHING ON GARGOYLE

You're not going to be able to do much without an Ethernet port.

Damn Apple!!! As soon as I come back I will try.

[yudda]

That router does not have enough memory space to include USB support.
You might like to try an older customised version from here:
http://dl.eko.one.pl/gargoyle-pl/attitu ... nt/ar71xx/

Dear Lantis, really not able to choose the right file for my need... a little help? Thx

[Lantis]

http://dl.eko.one.pl/gargoyle-pl/attitu ... pgrade.bin

Use that one if you are upgrading from gargoyle/openwrt

[yudda]

many thanks!