Gargoyle on D-Link DIR-300
Moderator: Moderators
Re: Gargoyle on D-Link DIR-300
Oops. Sorry about that.
Should be fixed now.
Should be fixed now.
Re: Gargoyle on D-Link DIR-300
no problem
Re: Gargoyle on D-Link DIR-300
windows XP still not working
Re: Gargoyle on D-Link DIR-300
windows 2000 with c++ installed now loads
Re: Gargoyle on D-Link DIR-300
windows 2000 + c++ flash success
Re: Gargoyle on D-Link DIR-300
The only problem is the router dosn't boot
i plugged in a serial cable, this is the result
i plugged in a serial cable, this is the result
Re: Gargoyle on D-Link DIR-300
That's odd. What's the output if after logging in with the serial cable you run "fis list" ?
Re: Gargoyle on D-Link DIR-300
Ah, ok I see what's going on. The problem is that the address system on your router's boot loader is different than the default on the Fon routers I've been working with. The flash memory starts at a different location, so it's trying to write to an address that doesn't exist (and evidently not reporting the error), and everything dies when you try to boot from a location that doesn't exist.
It is possible to detect this parameter automatically though, which should solve the problem. Give me a day or two and I should have it working. Thanks for your patience!
It is possible to detect this parameter automatically though, which should solve the problem. Give me a day or two and I should have it working. Thanks for your patience!
Re: Gargoyle on D-Link DIR-300
I should be thanking youThanks for your patience!
Re: Gargoyle on D-Link DIR-300
I should mention that the dir-300 only has 4mb of flash memory where the FON has 8mb.